DatasheetsPDF.com

2064VL Dataheets PDF



Part Number 2064VL
Manufacturers LatticeSemiconductor
Logo LatticeSemiconductor
Description 2.5VIn-SystemProgrammableSuperFASTHighDensityPLD
Datasheet 2064VL Datasheet2064VL Datasheet (PDF)

ispLSI 2064VL 2.5V In-System Programmable SuperFAST™ High Density PLD Features • SuperFAST HIGH DENSITY PROGRAMMABLE LOGIC — 2000 PLD Gates — 64 and 32 I/O Pin Versions, Four Dedicated Inputs — 64 Registers — High Speed Global Interconnect — Wide Input Gating for Fast Counters, State Machines, Address Decoders, etc. — Small Logic Block Size for Random Logic — 100% Functional, JEDEC and Pinout Compatible with ispLSI 2064V and 2064VE Devices 2.5V LOW VOLTAGE 2064 ARCHITECTURE — Interfaces with Sta.

  2064VL   2064VL


Document
ispLSI 2064VL 2.5V In-System Programmable SuperFAST™ High Density PLD Features • SuperFAST HIGH DENSITY PROGRAMMABLE LOGIC — 2000 PLD Gates — 64 and 32 I/O Pin Versions, Four Dedicated Inputs — 64 Registers — High Speed Global Interconnect — Wide Input Gating for Fast Counters, State Machines, Address Decoders, etc. — Small Logic Block Size for Random Logic — 100% Functional, JEDEC and Pinout Compatible with ispLSI 2064V and 2064VE Devices 2.5V LOW VOLTAGE 2064 ARCHITECTURE — Interfaces with Standard 3.3V TTL Devices (Inputs and I/Os are 3.3V Tolerant) — 60 mA Typical Active Current HIGH-PERFORMANCE E2CMOS® TECHNOLOGY — fmax = 165MHz Maximum Operating Frequency — tpd = 5.5ns Propagation Delay — Electrically Erasable and Reprogrammable — Non-Volatile — 100% Tested at Time of Manufacture — Unused Product Term Shutdown Saves Power IN-SYSTEM PROGRAMMABLE — 2.5V In-System Programmability (ISP™) Using Boundary Scan Test Access Port (TAP) — Open-Drain Output Option for Flexible Bus Interface Capability, Allowing Easy Implementation of Wired-OR or Bus Arbitration Logic — Increased Manufacturing Yields, Reduced Time-toMarket and Improved Product Quality — Reprogram Soldered Devices for Faster Prototyping 100% IEEE 1149.1 BOUNDARY SCAN TESTABLE Input Bus ® Functional Block Diagram Output Routing Pool (ORP) B7 B6 B5 B4 A0 Output Routing Pool (ORP) • Input Bus A2 GLB Logic Array D Q D Q B1 D Q A3 A4 A5 A6 A7 B0 • Output Routing Pool (ORP) Input Bus 0139A/2064VL • Description The ispLSI 2064VL is a High Density Programmable Logic Device available in 64 and 32 I/O-pin versions. The device contains 64 Registers, four Dedicated Input pins, three Dedicated Clock Input pins, two dedicated Global OE input pins and a Global Routing Pool (GRP). The GRP provides complete interconnectivity between all of these elements. The ispLSI 2064VL features in-system programmability through the Boundary Scan Test Access Port (TAP) and is 100% IEEE 1149.1 Boundary Scan Testable. The ispLSI 2064VL offers non-volatile reprogrammability of the logic, as well as the interconnect, to provide truly reconfigurable systems. The basic unit of logic on the ispLSI 2064VL device is the Generic Logic Block (GLB). The GLBs are labeled A0, A1…B7 (see Figure 1). There are a total of 16 GLBs in the ispLSI 2064VL device. Each GLB is made up of four macrocells. Each GLB has 18 inputs, a programmable AND/OR/Exclusive OR array, and four outputs which can be configured to be either combinatorial or registered. Inputs to the GLB come from the GRP and dedicated inputs. All of the GLB outputs are brought back into the GRP so that they can be connected to the inputs of any GLB on the device. • • THE EASE OF USE AND FAST SYSTEM SPEED OF PLDs WITH THE DENSITY AND FLEXIBILITY OF FPGAs — Enhanced Pin Locking Capability — Three Dedicated Clock Input Pins — Synchronous and Asynchronous Clocks — Programmable Output Slew Rate Control — Flexible Pin Placement — Optimized Global Routing Pool Provides Global Interconnectivity • ispDesignEXPERT™ – LOGIC COMPILER AND COMPLETE ISP DEVICE DESIGN SYSTEMS FROM HDL SYNTHESIS THROUGH IN-SYSTEM PROGRAMMING — Superior Quality of Results — Tightly Integrated with Leading CAE Vendor Tools — Productivity Enhancing Timing Analyzer, Explore Tools, Timing Simulator and ispANALYZER™ — PC and UNIX Platforms Copyright © 2000 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A. Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com September 2000 2064vl_02 1 Input Bus A1 D Q B2 Output Routing Pool (ORP) Global Routing Pool (GRP) B3 Specifications ispLSI 2064VL Functional Block Diagram Figure 1. ispLSI 2064VL Functional Block Diagram (64-I/O and 32-I/O Versions) GOE 0 GOE 1 I/O 63 I/O 62 I/O 61 I/O 60 I/O 59 I/O 58 I/O 57 I/O 56 I/O 55 I/O 54 I/O 53 I/O 52 I/O 51 I/O 50 I/O 49 I/O 48 I/O 31 I/O 30 I/O 29 I/O 28 Input Bus Generic Logic Blocks (GLBs) I/O 27 I/O 26 I/O 25 I/O 24 Input Bus Generic Logic Blocks (GLBs) Megablock B7 Output Routing Pool (ORP) B6 B5 B4 Megablock B7 Output Routing Pool (ORP) B6 B5 B4 Output Routing Pool (ORP) Output Routing Pool (ORP) Output Routing Pool (ORP) Input Bus Input Bus I/O 8 I/O 9 I/O 10 I/O 11 I/O 12 I/O 13 I/O 14 I/O 15 TDI/IN 0 TMS/IN 1 A2 B1 I/O 39 I/O 38 I/O 37 I/O 36 I/O 35 I/O 34 I/O 33 I/O 32 TCK/IN 3 TDO/IN 2 Input Bus A2 B1 A3 B0 I/O 4 I/O 5 I/O 6 I/O 7 TDI/IN 0 TDO/IN 1 Input Bus I/O 4 I/O 5 I/O 6 I/O 7 A1 Global Routing Pool (GRP) B2 I/O 43 I/O 42 I/O 41 I/O 40 A1 Global Routing Pool (GRP) B2 Output Routing Pool (ORP) I/O 0 I/O 1 I/O 2 I/O 3 I/O 47 A0 B3 I/O 46 I/O 45 I/O 44 I/O 0 I/O 1 I/O 2 I/O 3 I/O 23 A0 B3 I/O 22 I/O 21 I/O 20 A3 B0 I/O 19 I/O 18.


2064VE 2064VL 2090


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)