MCP19114

MCP19114/5 Digitally Enhanced Power Analog Synchronous Low-Side PWM Controller Features Input Voltage: 4.5V to 42V Can be Configured with Multiple Topologies Including but not Limited to: - Flyback - Ćuk - Boost - SEPIC (Single-Ended Primary-Inductor Converter) Capable of Quasi-Resonant or Fixed-Frequency Operation Low Quiescent Current: 5 mA Typical Low Sleep Current: 30 µA Typical Low-Side Gate Drivers: - +5V gate drive - 0.5A sink/source current - +10V gate drive - 1A sink/source current Peak Current Mode Control Differential Remote Output Sense Multiple Output Systems: - Main or Secondary AEC-Q100 Qualified Configurable Parameters: - VREF, Precision IOUT/VOUT Set Point (DAC) - Input Undervoltage Lockout (UVLO) - Input Overvoltage Lockout (OVLO) - Detection and Protection - Primary Current Leading Edge Blanking (0, 50 ns, 100 ns and 200 ns) - Gate Drive Dead Time (16 ns to 256 ns) - Fixed Switching Frequency Range: 31.25 kHz to 2.0 MHz - Slope Compensation - Quasi-resonant Configuration with Built-in Comparator and Programmable Offset Voltage Adjustment - Primary Current Offset Adjustment - Configurable GPIO Pin Options Integrated Low-Side Differential Current Sense Amplifier ±5% Current Regulation Thermal Shutdown Microcontroller Features Precision 8 MHz Internal Oscillator Block: - Factory-calibrated to ±1%, typical Interrupt-Capable - Firmware - Interrupt-on-change pins Only 35 Instructions to Learn 4096 Words On-Chip Program Memory...