Platinum Resistance Temperature Detector
Platinum Resistance Temperature Detector
M 219
M-series PRTDs are designed for large volume applications where long te...
Description
Platinum Resistance Temperature Detector
M 219
M-series PRTDs are designed for large volume applications where long term stability, interchangeability and accuracy over a large temperature range are vital. Typical applications are Automotive, Appliances, HVAC, Energy Management, Life Science and the process industry.
Nominal Resistance R0 1000 Ohm at 0°C Toler ance DIN EN 60751 1996-07 Class 2B Tolerance DIN EN 60751 2009-05 F 0.6 Or der Number Plastic Box 32 208 728 Lead Length (L) ± 1mm 7
The measuring point for the nominal resistance is defined at 6mm from the end of the sensor body.
Specification Temperature range
DIN EN 60751 -70°C to +500°C (continuous operation) (temporary use to 550°C possible) Tolerance Class B und 2B: -70°C +500°C Class 2B TC = 3750 ppm/K Pt clad Ni- wire Recommend connection technology: Welding, Crimping and Brazing Max. R0-Drift 0.04% after 1000h at 500°C at least 40g acceleration at 10 to 2000 Hz, depending on installation at least 100g acceleration with 8ms half-sine-wave, depends on installation unhoused for dry environments only > 100 MΩ at 20°C > 2 MΩ at 500°C 0.5 K/mW at 0°C Water current (v= 0.4m/s): Air stream (v= 2.0m/s): t0,5 = 0.05s t0,9 = 0.15s t0,5 = 3.0s t0,9 = 10.0s
Tolerance class: Temperature coefficient Leads
Long-term stability Vibration resistance
Shock resistance
Environmental conditions Insulation resistance
Self heating Response time
Measuring current
1000Ω: 0.1 to 0.3mA (Self heating has to be considered)
We re...
Similar Datasheet