DatasheetsPDF.com

AT86RF233 Dataheets PDF



Part Number AT86RF233
Manufacturers ATMEL Corporation
Logo ATMEL Corporation
Description 2.4GHz Transceiver
Datasheet AT86RF233 DatasheetAT86RF233 Datasheet (PDF)

AT86RF233 Low Power, 2.4GHz Transceiver for ZigBee, RF4CE, IEEE 802.15.4, 6LoWPAN, and ISM Applications PRELIMINARY DATASHEET Features • High Performance RF-CMOS 2.4GHz radio transceiver targeted for IEEE® 802.15.4, ZigBee®, RF4CE, 6LoWPAN, and ISM applications • Industry leading link budget: • Receiver sensitivity -101dBm • Programmable TX output power from -17dBm up to +4dBm • Ultra-low current consumption: • DEEP_SLEEP = 0.02µA • TRX_OFF = 300µA • RX_ON = 11.8mA (LISTEN) • Smar.

  AT86RF233   AT86RF233


Document
AT86RF233 Low Power, 2.4GHz Transceiver for ZigBee, RF4CE, IEEE 802.15.4, 6LoWPAN, and ISM Applications PRELIMINARY DATASHEET Features • High Performance RF-CMOS 2.4GHz radio transceiver targeted for IEEE® 802.15.4, ZigBee®, RF4CE, 6LoWPAN, and ISM applications • Industry leading link budget: • Receiver sensitivity -101dBm • Programmable TX output power from -17dBm up to +4dBm • Ultra-low current consumption: • DEEP_SLEEP = 0.02µA • TRX_OFF = 300µA • RX_ON = 11.8mA (LISTEN) • Smart Receiving Techniques enable further current reduction in LISTEN mode between 10 to 50% from 11.8mA • Desensitation will enable further reduction up to 1mA • BUSY_TX = 13.8mA (at max. transmit power) • Ultra-low supply voltage (1.8V to 3.6V) with internal regulator • Support for coin cell operation • Optimized for low BoM Cost and ease of production: • Few external components necessary (crystal, capacitors and antenna) • Easy to use interface: • Registers, frame buffer, and AES accessible through fast SPI • Only two microcontroller GPIO lines necessary • One interrupt pin from radio transceiver • Clock output with prescaler from radio transceiver • Radio transceiver features: • 128-byte FIFO (SRAM) for data buffering • Fully integrated, fast settling PLL to support Frequency Hopping • Supports 500kHz channel spacing • Battery monitor and Fast Wake-Up Time < 0.4msec • Special IEEE 802.15.4™ 2011 hardware support: • FCS computation and Clear Channel Assessment • RSSI measurement, Energy Detection and Link Quality Indication • MAC hardware accelerator: • Automated acknowledgement, CSMA-CA and retransmission • Automatic address filtering • Automated FCS check • Extended feature set hardware support: • AES 128-bit hardware accelerator • Antenna Diversity and RX/TX indication • Supported PSDU data rates: 250kb/s, 500kb/s, 1000kb/s and 2000kb/s • True Random Number Generation for security application • Reduced Power Consumption modes • Time and phase measurement support • Industrial and extended temperature range: • -40°C to +85°C and -40°C to +125°C • I/O and packages: • 32-pin Low-Profile QFN Package 5 x 5 x 0.9mm³ • RoHS/Fully Green • Compliant to EN 300 328/440, FCC-CFR-47 Part 15, ARIB STD-66, RSS-210 • Compliant to IEEE 802.15.4 2003/2006/2011 Atmel-8351E-MCU_Wireless-AT86RF233_Datasheet_072014 Table of Contents 1 Pin-out Diagram ............................................................................................................................7 1.1 Pin Descriptions ......................................................................................................................................................... 8 1.2 Analog and RF Pins ................................................................................................................................................... 9 1.2.1 Supply and Ground Pins........................................................................................................................................................ 9 1.2.2 RF Pins.................................................................................................................................................................................. 9 1.2.3 Crystal Oscillator Pins.......................................................................................................................................................... 10 1.2.4 Analog Pin Summary ........................................................................................................................................................... 10 1.3 Digital Pins ............................................................................................................................................................... 11 1.3.1 Driver Strength Settings....................................................................................................................................................... 11 1.3.2 Pull-up and Pull-down Configuration.................................................................................................................................... 11 2 Disclaimer .................................................................................................................................... 12 3 Overview ...................................................................................................................................... 12 4 General Circuit Description........................................................................................................ 13 5 Application Schematic................................................................................................................ 15 5.1 Basic Application Schematic.................................................................................................................................... 15 5.2 Extended Feature Set Application Schematic ...........................................


BY206 AT86RF233 2450BM15A0015


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)