DatasheetsPDF.com

MC96F6432 Dataheets PDF



Part Number MC96F6432
Manufacturers ABOV
Logo ABOV
Description 8-BIT MICROCONTROLLERS
Datasheet MC96F6432 DatasheetMC96F6432 Datasheet (PDF)

MC96F6432 ABOV SEMICONDUCTOR Co., Ltd. 8-BIT MICROCONTROLLERS MC96F6432 User’s Manual (Ver. 2.9) June 22, 2018 Ver. 2.9 1 MC96F6432 REVISION HISTORY VERSION 0.0 (January 14, 2011) VERSION 1.0 (June 27, 2011) Change ‘Typ/Max’ to “LVR/LVI level” in LVR/LVI electrical characteristics. Change ‘600/1200/2000 kΩ (Min/Typ/Max)’ to “RX1” in DC electrical characteristics. Change ‘3/6/9 kHz (Min/Typ/Max)’ to “fWDTRC” in INTERNAL WATCH-DOG RC OSCILLATION characteristics. Remove WDTRC Current Max value a.

  MC96F6432   MC96F6432


Document
MC96F6432 ABOV SEMICONDUCTOR Co., Ltd. 8-BIT MICROCONTROLLERS MC96F6432 User’s Manual (Ver. 2.9) June 22, 2018 Ver. 2.9 1 MC96F6432 REVISION HISTORY VERSION 0.0 (January 14, 2011) VERSION 1.0 (June 27, 2011) Change ‘Typ/Max’ to “LVR/LVI level” in LVR/LVI electrical characteristics. Change ‘600/1200/2000 kΩ (Min/Typ/Max)’ to “RX1” in DC electrical characteristics. Change ‘3/6/9 kHz (Min/Typ/Max)’ to “fWDTRC” in INTERNAL WATCH-DOG RC OSCILLATION characteristics. Remove WDTRC Current Max value at INTERNAL WATCH-DOG RC OSCILLATION characteristics. Add ‘1.0 μA (Typ)’ to “IWDTRC” in INTERNAL WATCH-DOG RC OSCILLATION characteristics. Add NOTE at ‘T4CK[3:0] bits description’. Change ‘cleared by software(S/W)’ in TIMER 3/4 BLOCK DIAGRAM. Deleted AN15 Function in 12-bit A/D converter. Added VDD18 Function in 12-bit A/D converter Change ‘2500/5000/10000 kΩ (Min/Typ/Max)’ to “RX2” in DC electrical characteristics. Change ‘8.0/12.0 uA (Typ/Max) to “Current consumption(one of two)” in LVR/LVI characteristics. Change ‘10.0/15.0 uA (Typ/Max) to “Current consumption(both)” in LVR/LVI characteristics. Change ‘±3 (Max)’ to “ILE” in ADC characteristics. EXTRF/LVRF initial value changed ‘0’ to ‘unknown’. Add NOTE 3 at LVRF description. VERSION 1.1 (July 14, 2011) Added AN15 Function in 12-bit A/D converter. Deleted VDD18 Function in 12-bit A/D converter Change ‘2/5/10 kHz (Min/Typ/Max)’ to “fWDTRC” in INTERNAL WATCH-DOG RC OSCILLATION characteristics. Change temperature condition of HIGH FREQUENCY INTERNAL RC OSCILLATOR characteristics. VERSION 1.2 (July 20, 2011) The MC96F6232M device name is changed ‘MC96F6232M’ to ‘MC96F6332M’. VERSION 1.3 (November 23, 2011) Moved more descriptions at RXC0/RC1 function descriptions. Moved more descriptions at T0EN function descriptions. Add NOTE at ‘LVRVS[3:0] bits description’. Change ‘50.0/80.0 uA (Typ/Max) to “IDD3” in DC electrical characteristics. Modified the WDTCR.1 bit name. Add ‘Instructions on how to use the input port’ descriptions. VERSION 1.4 (January 16, 2012) Change ‘±1.0%(TA= 0°C ~ +50°C)/±2.0%(TA= -20°C ~ +85°C)/±3.0%(TA= -40°C ~ +85°C)’ @2.0V – 5.5V to “IRC’s Tolerance” in Internal RC Oscillator characteristics. Change ‘±4 (Max)’ to “ILE” in ADC electrical characteristics. Change ‘50/150mV (Typ/Max)’ to “LVR/LVI Hysteresis” in LVR/LVI electrical characteristics. Retype some typos on I2C Frequency formula and P5FSR’s SFR Address in Table 9-1. VERSION 1.5 (April 20, 2012) Change ‘30V/ms (Max)’ to “VDD Voltage Rising Time” in Power-on Reset Electrical characteristics. Add a “Table 11.27 LCD Frame Frequency” in LCD driver chapter. Retype a typo at ‘EO Register description’. VERSION 1.6 (August 6, 2012) Add a package type, “MC96F6332L(32 LQFP)”. Retype some typos on ‘Timer 4 and USI0/1’s contents’. 2 June 22, 2018 Ver. 2.9 MC96F6432 VERSION 1.7 (November 19, 2013) Retype a typo on ‘P5FSR register’s contents’. VERSION 1.8 (February 26, 2014) Change a package diagram, “44-Pin MQFP-1010”. VERSION 1.9 (March 21, 2014) AVREF range changed from 1.8V~VDD to 2.7V~VDD Figure 10.3 and Figure 10.6 modified Appendix 1 “DJNZ Rn,rel” instruction 3bytes  2bytes Add contents, “Writing “1” has no effect” in all interrupt flag bits. VERSION 2.0 (April 11, 2014) AVREF range changed from 2.7V~VDD to 1.8V~VDD Figure 11.41 modified VERSION 2.1 (July 9, 2014) Change “Read Protection” to “Code Read Protection” in Configure Option. Change “Hard-Lock” to “Code Write Protection” in Configure Option. Change “RESETB select” to “Select RESETB pin” in Configure Option. Change “Protection Area” to “Specific Area Write Protection” in Configure Option. Add note of “Specific Area Write Protection” in Configure Option, “When PAEN = ‘1’, it is applied.” Fix the typo. VERSION 2.2 (October 13, 2014) Add a package type, “MC96F6432L(48 LQFP-0707)”. VERSION 2.3 (November 4, 2014) Add contents of Flash, “Protection for Invalid Erase/Write”. VERSION 2.4 (April 10, 2015) Add a note at P0, P1, P2, P3, P4, P5, EIFLAG0 register description and SFR map. Change a Figure 10.3 Interrupt sequence flow Change a Figure 11.53 A/D Analog Input pin with Capacitor in12-Bit A/D Converter. VERSION 2.5 (May 11, 2015) Add a chapter “C. ESD Test Method” in APPENDIX VERSION 2.6 (December 22, 2015) Change symbol name from ILE, DLE, FSE, tCON, VAN, IAN to INL, DNL, TOE, tCONV, VAIN, IAIN in 7.3 A/D Converter Characteristics Change tR spec max value form 30.0V/ms to 5.0V/ms in 7.4 Power-On Reset Characteristics Add a note about OSCCR in Chapter 11.1 Clock Generator. Fixed typos. VERSION 2.7 (April 4, 2016) Change tR spec max value form 5.0V/ms to 30.0V/ms in 7.4 Power-On Reset Characteristics Add Flash Data Retention Time in 7.15 Internal Flash Rom Characteristics Add a chapter 7.23 Rec.


P70N02LS MC96F6432 INR18650-20R


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)