BA5600U

Li-SO2 primary battery system BA 5600 A/U Assembled from 3 LO 26 SX cells connected in series. Key features A non-replaceable fuse is incorporated in the negative leg. A normally closed thermal fuse (TCO) is incorporated in the battery. It is non-replaceable and non-resetable. A diode is incorporated to prevent charging or flow of current into the batter y. A device consisting of a manually activated switch and resistor designed to discharge the battery to 0 V is built into the battery. Made in the USA Typical applications AN/PSC-2 Communications Terminal Electrical Characteristics Typical OCV (V) Nominal voltage (at 500mA) (V) Cut-off (V) Typical Capacity +21 °C / + 70 °F (at 250 mA discharge current) Operating temperature -40° C to 71° C -40° F to 160° F Storage Recommended max Possible +35°C/ +95°F -40° C to 71° C / -40° F to 160° F 9.0 8.1 4.0 7.5 Physical Characteristics Typical Weight (g/oz) Weight of Li metal content (g/oz) Max. Width (mm/ in) Max. Height (mm/ in) Max. Depth (mm/ in) Battery Case References Reference specifications NSN Reference MIL PRF 49471B (CR) or Saft Standard Specifications 6135-01-168-2944 Plastic 360 / 12.7 7.2 / 0.25 39 / 1.56 186 / 7.34 http://www.Datasheet4U.com March 2006 BA 5600 A/U dimensions *All measurements in inches Capacity vs rate at various temperatures Electrical schematic Saft Specialty Battery Group 12, rue Sadi Carnot 93170 Bagnolet - France Tel: +33 (0)1 49 93 19 18 Fax: +33 (0)1 49 93 19 69 Doc N° 31070-2...