Assembled from 2 LO 26 SX cells connected
Li-SO2 primary battery system BA 5847 B/U
Assembled from 2 LO 26 SX cells connected in series.
Key features • A non-re...
Description
Li-SO2 primary battery system BA 5847 B/U
Assembled from 2 LO 26 SX cells connected in series.
Key features A non-replaceable fuse is incorporated in the negative leg. A normally closed thermal fuse (TCO) is incorporated in the battery. It is non-replaceable and non-resetable. A diode is incorporated to prevent charging or flow of current into the batter y. A device consisting of a manually activated switch and resistor designed to discharge the battery to 0 V is built into the battery. Made in the USA Typical applications AN/PRM-34 Radio Tests AN/PRS-7 Mine Detection AN/TS-54 Night Sight
Electrical Characteristics Typical OCV (V) Nominal voltage (at 500mA) (V) Cut-off (V) Typical Capacity (Ah) +21 °C / + 70 °F (at 250 mA discharge current) Operating temperature -40° C to 71° C -40° F to 160° F Storage Recommended max Possible +35°C/ +95°F -40° C to 71° C / -40° F to 160° F 6.0 5.3 4.0 7.5
Physical Characteristics Typical Weight (g/oz) Weight of Li metal content (g/oz) Max. Width (mm/ in) Max. Height (mm/ in) Max. Depth (mm/ in) Battery Case References Mating Connector Reference specifications NSN Reference Keystone Electronics No. 212 MIL PRF 49471B (CR) or Saft Standard Specifications 6135-01-090-5364 240 / 8.47 4.8 / 0.16 95/ 3.78 65 / 2.58 38 / 1.53 Plastic
http://www.Datasheet4U.com
March 2006
BA 5847 B/U dimensions
*All measurements in inches
Capacity vs rate at various temperatures
Electrical schematic
Saft Specialty Battery Group
12, rue Sadi ...
Similar Datasheet