Document
Bulletin I2403 rev. A 07/00
22RIA SERIES
MEDIUM POWER THYRISTORS Stud Version
Features
Improved glass passivation for high reliability and exceptional stability at high temperature High di/dt and dv/dt capabilities Standard package Low thermal resistance Metric threads version available Types up to 1600V V DRM / V RRM
22A
Typical Applications
Medium power switching Phase control applications Can be supplied to meet stringent military, aerospace and other high-reliability requirements
Major Ratings and Characteristics
Parameters
IT(AV) @ TC IT(RMS) ITSM
2
10 to 120
22 85 35
22RIA 140 to 160
22 85 35 340 355 575 525 1400 to 1600 110
Units
A °C A A A A2 s A2 s V µs °C
@ 50Hz @ 60Hz
400 420 793 724 100 to 1200
I t
@ 50Hz @ 60Hz
VDRM/VRRM tq TJ typical
- 65 to 125
Case Style TO-208AA (TO-48)
www.irf.com
1
22RIA Series
Bulletin I2403 rev. A 07/00
ELECTRICAL SPECIFICATIONS Voltage Ratings
Voltage Type number Code
10 20 40 60 22RIA 80 100 120 140 160
V DRM /V RRM , max. repetitive peak and off-state voltage (1) V
100 200 400 600 800 1000 1200 1400 1600
VRSM , maximum nonrepetitive peak voltage (2) V
150 300 500 700 900 1100 1300 1500 1700
I DRM /I RRM max.
@ TJ = TJ max.
mA
20
10
(1) Units may be broken over non-repetitively in the off-state direction without damage, if dI/dt does not exceed 20A/µs (2) For voltage pulses with tp ≤ 5ms
On-state Conduction
Parameter
IT(AV) IT(RMS) ITSM Max. average on-state current @ Case temperature Max. RMS on-state current Max. peak, one-cycle non-repetitive surge current
22RIA 10 to 120
22 85 35 400 420 335 355
140 to 160
22 85 35 340 355 285 300 575 525 405 370 5750 1.01 1.17 12.24 10.35 --1.80
Units
A °C A A
Conditions
180° sinusoidal conduction
t = 10ms t = 8.3ms t = 10ms t = 8.3ms
No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max.
I2t
Maximum I2t for fusing
793 724 560 515
A2s
t = 10ms t = 8.3ms t = 10ms t = 8.3ms
I2√t
Maximum I2√t for fusing voltage
7930 0.83 0.95 14.9 13.4 1.70 ---
A2√s V
t = 0.1 to 10ms, no voltage reapplied, TJ = TJ max. (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. (I > π x IT(AV)), TJ = TJ max.
VT(TO)1 Low level value of threshold VT(TO)2 High level value of threshold voltage rt1 rt2 VTM Low level value of on-state slope resistance High level value of on-state slope resistance Max. on-state voltage
mΩ
(16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. (I > π x IT(AV)), TJ = TJ max.
V
Ipk= 70 A, TJ = 25°C TJ = 25°C. Anode supply 6V, resistive load,
IH IL
Maximum holding current Latching current
130 200
mA
2
www.irf.com
22RIA Series
Bulletin I2403 rev. A 07/00
Switching
Parameter
di/dt Max. rate of rise of turned-on current VDRM ≤ 600V VDRM ≤ 800V VDRM ≤ 1000V VDRM ≤ 1600V tgt trr tq Typical turn-on time Typical reverse recovery time 200 180 160 150 0.9 4 µs TJ = 25°C, at = rated VDRM/VRRM, TJ = 125°C TJ = TJ max., ITM = IT(AV), tp > 200µs, di/dt = -10A/µs Typi.