150 WATT SWITCHING POWER SUPPLIES
FSP150 SERIES
150 WATT SWITCHING POWER SUPPLIES
GENERAL SPECIFICATIONS
Construction Connectors / Terminals Efficiency Tu...
Description
FSP150 SERIES
150 WATT SWITCHING POWER SUPPLIES
GENERAL SPECIFICATIONS
Construction Connectors / Terminals Efficiency Turn on delay time Power Factor Dielectric Isolation MTBF (per MIL-HDBK-217F) 94V-1 rated polyphenylene-oxide case IEC 320/C14 inlet. Options for DC Out. 88% min , at 110 VAC or 240 VAC 5 Sec max 0.95 typical 3000VAC from input to output 1500VAC from input to ground 100,000 hours minimum at full load at 25 °C ambient
UNIVERSAL INPUT
FEATURES
♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ Wide range input 90 to 260VAC Standby consumption < 1W Low safety ground leakage current Low ripple and noise Fast transient response Overcurrent, Short-circuit, Overvoltage, and Thermal protections 100% burn-in at full rated load Meets EN55022, FCC Class B, VCC, EN61000 Class A,D Compliant with RoHS requirements
OUTPUT SPECIFICATIONS
Total Output Power Output Voltage / Current, Adjustability, Peak Current Minimum Load Hold Up Time Line Regulation Ripple and Noise Overvoltage Protection Overcurrent / Short Circuit Protection Transient Response Refer to Rating Chart for each model Refer to Rating Chart for each model No minimum load required 3 mSec min @ 100 VAC ±0.5% max at full load 350mV peak to peak max Setting at 110-140% of Vnom output voltage Continuous protection with automatic recovery Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 uS after a 25% step load change.
DESCRIPTION
This series of switching power supplies are specially designed for portabl...
Similar Datasheet