Single Relays
PCB Relays Single Relays
Micro Relay K SMD (Standard – Open Vent Hole)
Catalog 1308028-2
Revised 3-2008
Features
– Sma...
Description
PCB Relays Single Relays
Micro Relay K SMD (Standard – Open Vent Hole)
Catalog 1308028-2
Revised 3-2008
Features
– Small power relay for surface mounted technology – Limiting continuous current 30 A – Minimal weight – Low noise operation – Relay designed for convection and infrared reflow soldering – Standard SMD and SMD with open vent hole versions – For twin version refer to Double Micro Relay K SMD – For latching (bistable) version refer to Micro Relay K Latching – For through hole technology refer to Micro Relay K
Typical Applications
– – – – – – – – – – Car alarm Door control Door lock Hazard warning signal Immobilizer Interior lights Seat control Sun roof Window lifter Wiper control
86M1_3D1
Please contact Tyco Electronics for relay application support.
Design
– ELV/RoHS/WEEE compliant – SMD (standard): sealed type washable – SMD (open vent hole): sealed type open vent hole
Terminals
SMD terminals for assembly on printed circuit boards
Conditions
All parametric, environmental and endurance tests are performed according to EIA Standard RS-407-A at standard test conditions unless otherwise noted: 23°C ambient temperature, 20 - 50% RH, 998.9 ±33.9 hPa. For general storage and processing recommendations please refer to our Application Notes and especially to Storage in the “Glossary” page 23 or at http://relays.tycoelectronics.com/ appnotes/
Weight
Approx. 4 g (0.14 oz.)
Nominal Voltage
12 V
Disclaimer
All technical performance data apply to the relay as such, sp...
Similar Datasheet