LM138/LM338 5-Amp Adjustable Regulators
May 1998
LM138/LM338 5-Amp Adjustable Regulators
General Description
The LM138...
LM138/LM338 5-Amp Adjustable
Regulators
May 1998
LM138/LM338 5-Amp Adjustable
Regulators
General Description
The LM138 series of adjustable 3-terminal positive voltage
regulators is capable of supplying in excess of 5A over a 1.2V to 32V output range. They are exceptionally easy to use and require only 2 resistors to set the output voltage. Careful circuit design has resulted in outstanding load and line regulation — comparable to many commercial power supplies. The LM138 family is supplied in a standard 3-lead
transistor package. A unique feature of the LM138 family is time-dependent current limiting. The current limit circuitry allows peak currents of up to 12A to be drawn from the
regulator for short periods of time. This allows the LM138 to be used with heavy transient loads and speeds start-up under full-load conditions. Under sustained loading conditions, the current limit decreases to a safe value protecting the
regulator. Also included on the chip are thermal overload protection and safe area protection for the power
transistor. Overload protection remains functional even if the adjustment pin is accidentally disconnected. Normally, no capacitors are needed unless the device is situated more than 6 inches from the input filter capacitors in which case an input bypass is needed. An output capacitor can be added to improve transient response, while bypassing the adjustment pin will increase the
regulator’s ripple rejection. Besides replacing fixed
regulators or discre...