2596 AND 2597
8-CHANNEL SATURATED SINK DRIVERS
2596 AND 2597
8-CHANNEL SATURATED SINK DRIVERS
Low output-saturation vo...
2596 AND 2597
8-CHANNEL SATURATED SINK DRIVERS
2596 AND 2597
8-CHANNEL SATURATED SINK DRIVERS
Low output-saturation voltages at high load currents are provided by UDN2596A and UDN2597A sink driver ICs. These devices can be used as interface buffers between standard low-power digital logic (particularly MOS) and high-power loads such as relays, solenoids, stepping motors, and LED or incandescent displays. The eight saturated sink drivers in each device feature high-voltage, high-current open-collector outputs. Transient suppression clamp diodes and a minimum 35 V output sustaining voltage allow their use with many inductive loads. The saturated (non-Darlington)
NPN outputs provide low collectoremitter voltage drops as well as improved turn-off times due to an active pull-down function within the output predrive section. The UDN2596A is for use with output loads to 500 mA while the UDN2597A is for use with loads to 1 A. Adjacent outputs may be paralleled for higher load currents. Inputs require very low input current and are activated by a low logic level consistent with the much greater sinking capability associated with NMOS, CMOS, and TTL logic. The UDN2596A and UDN2597A are rated for use with 5 V logic levels.
Data Sheet 29320.2B
Dwg. No. W-100
Both devices are furnished in 20-pin DIP packages with copper leadframes for improved thermal characteristics. The UDN2596A is also available for operation between -40°C and +85°C. To order, change the prefix from ‘UDN’ to ‘UDQ’...