4K SPI Bus Serial EEPROM
Not recommended for new designs – Please use 25AA040A or 25LC040A.
25AA040/25LC040/25C040
4K SPI Bus Serial EEPROM
De...
Description
Not recommended for new designs – Please use 25AA040A or 25LC040A.
25AA040/25LC040/25C040
4K SPI Bus Serial EEPROM
Device Selection Table
Part Number
VCC Range
Max. Clock Frequency
25AA040 25LC040 25C040
1.8-5.5V 2.5-5.5V 4.5-5.5V
1 MHz 2 MHz 3 MHz
Temp. Ranges
I I I,E
Features:
Low-power CMOS technology:
- Write current: 3 mA, typical
- Read current: 500 μA, typical
- Standby current: 500 nA, typical
512 x 8-bit organization
16 byte page
Write cycle time: 5 ms max.
Self-timed Erase and Write cycles
Block write protection:
- Protect none, 1/4, 1/2 or all of array
Built-in write protection:
- Power on/off data protection circuitry
- Write enable latch
- Write-protect pin
Sequential read
High reliability:
- Endurance: 1M cycles
- Data retention: > 200 years
- ESD protection: > 4000V
8-pin PDIP, SOIC and TSSOP packages
Temperature ranges supported:
- Industrial (I):
-40°C to +85°C
- Automotive (E) (25C040): -40°C to +125°C
Description:
The Microchip Technology Inc. 25AA040/25LC040/ 25C040 (25XX040*) is a 4 Kbit serial Electrically Erasable PROM. The memory is accessed via a simple Serial Peripheral Interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a Chip Select (CS) input.
*25XX040 is used in this document as a generic part number for the 25AA040/25LC040/25C040 devices.
Communication to th...
Similar Datasheet