600W Transient Voltage Suppressor
600W Transient Voltage Suppressor
SMD Diodes Specialist
P6KE-G Series
Stand-off Voltage: 6.8 ~ 600V Power Dissipation: ...
Description
600W Transient Voltage Suppressor
SMD Diodes Specialist
P6KE-G Series
Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device
Features
-Plastic package has underwriters laboratory flammability classification 94V-0 -600W, surge capability at 1mS. -Excellent clamping capability. -Low Zener impedance. -Fast response time: typically less than 1.0pS from 0 volt to BV min. -Typical IR less than 1μA above 10V.
1.000(25.40) MIN.
DO-15
0.033(0.84) 0.027(0.71)
0.300(7.63) 0.230(5.85)
Mechanical Data
-Epoxy: UL 94V-0 rate flame retardant -Case: Molded plastic DO-15 -Terminals: Axial leads solderable per MIL-STD-202 , Method 208 -Polarity: Color band denotes positive end (cathode) -Weight: 0.4 gram (0.014oz.)
1.000(25.40) MIN.
0.142(3.61) 0.102(2.60)
Dimensions in inches and (millimeter)
Maximum Ratings and Electrical Characteristics
Parameter
Peak power dissipation with a 10/1000μs waveform (Note 1) Peak pulse current with a 10/1000μs waveform (Note 1) Power dissipation on infinite heatsink at TL=75 C Peak forward surge current, 8.3mS single half sine-wave unidirectional only (JEDEC method) (Note 2) Maximum instantantaneous forward voltage at 50 A for unidirectional only(Note 3) Operating junction and storage temperature range
O
Symbol
PPP
Value
600
Unit
W
IPP PD
See Next Table 5.0
A W
IFSM
100
A
VF
3.5/5.0
V
TJ, TSTG
-55 to +150
O
C
NTOES: O (1) Non-repetitive current pulse, per fig.5 and derated above TA=25 C per fig. 1 (2) Measured on 8.3ms sing...
Similar Datasheet