LM4265

The information disclosed herein was originated by and is the property of Densitron International. Densitron International reserves all patent, proprietary, design, use, sales, manufacturing and reproduction rights thereto. REVISIONS REV. DESCRIPTION DATE APPROVED - RELEASED ON ECN #E0562 11/5/96 MA 1. 2. 3. 4. Specification subject to change without notice. All dimensions and specifications apply to standard modules. This information may vary for modules with optional features. All dimensions are in millimeters. Precautions:These precautions apply equally to modules from all makers, not just Densitron. Violation of these guidelines may void the warranty and can cause problems ranging from erratic operation to catastrophic display failure. Handling precautions: ♦ This device is susceptible to Electro-Static Discharge (ESD) damage. Observe Anti-Static precautions. Power supply precautions: ♦ Identify and, at all times, observe absolute maximum ratings for both logic and LC drivers. Note that there is some variance between models. ♦ Prevent the application of reverse polarity to V DD and VSS, however briefly. ♦ Use a clean power source free from transients. Power up conditions are occasionally “jolting” and may exceed the maximum ratings of the module. ♦ The +5V power of the module should also supply the power to all devices which may access the display. Don’t allow the data bus to be driven when the logic supply to the module is turned off. ♦ DO NOT install a capacitor b...