Voltage Regulators. TA78L09F Datasheet
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
5 V, 6 V, 7 V, 8 V, 9 V, 10 V, 12 V, 15 V, 18 V, 20 V, 24 V
3-Terminal Positive Voltage Regulators
z Best suited to power supply for TTL/CMOS.
z No external parts needed.
z Built-in overheating protection.
z Built-in overcurrent protection.
z Max output current of 150mA. (Tj = 25°C).
z Packaged in PW-mini (SOT-89).
Weight: 0.05 g (Typ.)
Part No. (or abbreviation code) *1
(or abbreviation code)
Note: A line beside a Lot No. identifies the indication of product Labels.
Without a line: [[Pb]]/INCLUDES > MCV
With a line: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27
January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
The product(s) in this docume nt (“Product”) contain functions intended to protect the Product from temporar y
small ov erloads such as m inor sh ort-term overcurre nt or overh eating. T he prot ective functio ns d o no t
necessarily pr otect Product und er all circu mstances. When incor porating Product into yo ur s ystem, p lease
design the s ystem (1) to avoi d such ov erloads upon the Product, and (2) to shut do wn or otherwise relieve
the Product of such overl oad conditions immediately upon occurrence. For details, ple ase refer to the notes
appearing below in this document and other documents referenced in this document.
Absolute Maximum Ratings (Ta = 25°C)
(Ta = 25°C)
Rth (j-a) 250
−30 to 85
−55 to 150
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).