Current Mode PWM Controller
RESLEEPRAILSCEAELAODSNNEFTIO:oDD2EOA7NP9NT0IDO0AT6L8COPY
OB2279 Current Mode PWM ControllerFreq Shuffling with Latch Sh...
Description
RESLEEPRAILSCEAELAODSNNEFTIO:oDD2EOA7NP9NT0IDO0AT6L8COPY
OB2279 Current Mode PWM ControllerFreq Shuffling with Latch Shutdown
GENERAL DESCRIPTION
OB2279 is a highly integrated current mode PWM control IC optimized for high performance, low standby power and cost effective offline flyback converter applications. PWM switching frequency at normal operation is externally programmable and trimmed to tight range. At no load or light load condition, the IC operates in extended ‘burst mode’ to minimize switching loss. Lower standby power and higher conversion efficiency is thus achieved. VDD low startup current and low operating current contribute to a reliable power on startup design with OB2279. A large value resistor could thus be used in the startup circuit for reduced power loss. The internal slope compensation improves system large signal stability and reduces the possible subharmonic oscillation at high PWM duty cycle output. Leading-edge blanking on current sense input removes the signal glitch due to snubber circuit diode reverse recovery and greatly reduces the external component count and system cost in the design. OB2279 offers comprehensive protection coverage including Cycle-by-Cycle current limiting(OCP), VDD Under Voltage Lockout(UVLO), VDD Over Voltage Protection(OVP), VDD Clamp, Gate Clamp, Over Load protection(OLP) and Over Temperature protection (OTP), etc. Different latch shutdown options are offered on OB2279 in different device version. V version has OVP Lat...
Similar Datasheet