PWM Controller. OB2278 Datasheet

OB2278 Controller. Datasheet pdf. Equivalent

Part OB2278
Description Current Mode PWM Controller
Feature Current Mode PWM ControllerLatch Shutdown OB2278 Product Specification GENERAL DESCRIPTION OB2278.
Manufacture On-Bright
Total Page 13 Pages
Datasheet
Download OB2278 Datasheet



OB2278
GENERAL DESCRIPTION
OB2278 is a highly integrated current mode PWM
control IC optimized for high performance, low
standby power and cost effective offline flyback
converter applications.
PWM switching frequency at normal operation is
externally programmable and trimmed to tight
range. At no load or light load condition, the IC
operates in extended ‘burst mode’ to minimize
switching loss. Lower standby power and higher
conversion efficiency is thus achieved.
VDD low startup current and low operating current
contribute to a reliable power on startup design
with OB2278. A large value resistor could thus be
used in the startup circuit for reduced power loss.
The internal slope compensation improves system
large signal stability and reduces the possible
sub-harmonic oscillation at high PWM duty cycle
output. Leading-edge blanking on current sense
input removes the signal glitch due to snubber
circuit diode reverse recovery and greatly reduces
the external component count and system cost in
the design.
OB2278 offers comprehensive protection
coverage including Cycle-by-Cycle current
limiting(OCP),
VDD
Under
Voltage
Lockout(UVLO),
VDD
Over
Voltage
Protection(OVP), VDD Clamp, Gate Clamp, Over
Load protection(OLP) and Over Temperature
protection (OTP), etc.
Different latch shutdown options are offered on
OB2278 in different device version. T version
supports both OVP and OTP latch shutdown. L
version provides all OVP, OTP and OLP latch
shutdown control.
Excellent EMI performance is achieved with soft
switching control at the totem pole gate drive
output.
OB2278 is offered in SOP-8 and DIP-8 packages.
TYPICAL APPLICATION
OB2278
Current Mode PWM ControllerLatch Shutdown
Product Specification
FEATURES
Power On Soft Start
Extended Burst Mode Control For Improved
Efficiency and Minimum Standby Power
Design
Audio Noise Free Operation
External Programmable PWM Switching
Frequency
Internal Synchronized Slope Compensation
Low VIN/VDD Startup Current(3uA) and Low
Operating Current (2.3mA)
Leading Edge Blanking on Current Sense
Input
Complete Protection Coverage with selective
protections for Latch Shutdown
o VDD Over Voltage Protection(OVP) – Latch
Shutdown
o Over Temperature Protection(OTP) – Latch
Shutdown
o Over Load Protection. (OLP) – Auto
recovery or Latch Shutdown
o VDD Under Voltage Lockout with Hysteresis
(UVLO)
o Gate Output Voltage Clamp (16.5V)
o Built-in OCP Compensation to Achieve
Minimum OPP Variation over Universal AC
Input Range.
APPLICATIONS
Offline AC/DC flyback converter for
Adaptor
Notebook Adaptor
LCD Monitor/TV/PC/Set-Top Box Power
Supplies
Open-frame SMPS
Printer Power
©On-Bright Electronics
Confidential
-1-
Datasheet
OB_DOC_DS_2278A2



OB2278
OB2278
Current Mode PWM ControllerLatch Shutdown
GENERAL INFORMATION
Pin Configuration
The pin map of OB2278 in DIP8 and SOP8
package is shown as below.
Ordering Information
Part Number
OB2278AP-T
Description
DIP8, tube package, T
version with OVP/OTP latch
OB2278AP-L
OB2278CP-T
DIP8, tube package, L
version with OVP/OTP/OLP
latch
SOP8, tube package, T
version with OVP/OTP latch
OB2278CPA-T
SOP8, taping package, T
version with OVP/OTP latch
OB2278CP-L
SOP8, tube package, L
version with OVP/OTP/OLP
latch
OB2278CPA-L
SOP8, taping package, L
version with OVP/OTP/OLP
latch
Note: All Devices are offered in Pb-free Package if not
otherwise noted.
Package Dissipation Rating
Package
DIP8
SOP8
RθJA (/W)
90
150
Absolute Maximum Ratings
Parameter
VDD Clamp Voltage (Vclamp)
VDD Clamp Continuous
Current
VIN / VDD Input Voltage
FB Input Voltage
Sense Input Voltage
RT Input Voltage
RI Input Voltage
Min/Max Operating Junction
Temperature TJ
Min/Max Storage Temperature
Tstg
Lead Temperature (Soldering,
10 seconds)
Value
35 V
10 mA
-0.3V to Vclamp
-0.3 to 7V
-0.3 to 7V
-0.3 to 7V
-0.3 to 7V
-20 to 150
-55 to 150
260
Note: Stresses beyond those listed under “absolute
maximum ratings” may cause permanent damage to the
device. These are stress ratings only, functional operation of
the device at these or any other conditions beyond those
indicated under “recommended operating conditions” is not
implied. Exposure to absolute maximum-rated conditions for
extended periods may affect device reliability.
OB2278 X X X - X
Current Mode PWM Controller
Package
A:DIP8
C:SOP8
Package Pb-free
P : Lead Free
Packing
Blank : Tube
A : Taping
Version
T : OVP/OTP Latch
L : OVP/OTP/OLP
Latch
©On-Bright Electronics
Confidential
-2-
Datasheet
OB_DOC_DS_2278A2





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)