Document
F-213
TFM–115–02–L–S
TFM–110–02–L–D–LC
™
(1,27 mm) .050" TFM, TFML SERIES
SYSTEM
TFM–110–01–L–D–RE1–WT
TFML–115–12–L–D–K
SMT & THROUGH-HOLE HEADER
SPECIFICATIONS
For complete specifications and recommended PCB layouts see www.samtec.com?TFM or www.samtec.com?TFML Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27 µm) Ni Voltage Rating: 350 VAC mated with SFM Operating Temp Range: -55°C to +125°C RoHS Compliant: Yes CURRENT RATING (PER CONTACT) AMBIENT TEMP TFM/SFM 20°C 5A 40°C 4.5A 60°C 3.9A 95°C 2.6A 6 POSITIONS (2x3) POWERED
TFM Mates with: SFM, SFMC, SFSD TFML Mates with: SFML, SFSD (–XL option), SFSDT (–XL option) TFM-DH Mates with: SFM (-DH), SFMC, SFSDX (–S, -D, -SR, -DR)
Shrouded body for blind mating
(1,27 mm x 1,27 mm) .050" x .050" micro pitch
APPLICATIONS
TFM-DH to SFM-DH SHOWN
TM
EXTENDED LIFE PRODUCT
10 year Mixed Flowing Gas with 30µ" Gold 1,000 cycles when mated with SFM
Surface mount or Through-hole tails
TFM to SFM-SH SHOWN
Processing:
TYPE STRIP
1
NO. PINS PER ROW
LEAD STYLE
PLATING OPTION
Lead-Free Solderable: Yes SMT Lead Coplanarity: (0,10 mm) .004" max (05-25) (0,15 mm) .006" max (30-50)
04, 06, 08 TFM
= Standard (TFM only)
MATED HEIGHT
LEAD STYLE TFM SFM MATED HEIGHT* (6,35) .250
TFML
= Locking LEAD STYLE
(T/H)
05, 07, 10, 15, 20, 25, 30, 35, 40, 45, 50
(Call Samtec for other sizes)
(1,27) .050 x No. of Positions + (3,18) .125 (See website for –DS & –WT OAL) –REX = (1,27) .050 x No. of Positions + (6,68) .263 (2,79) .110
Specify LEAD STYLE from chart COST-SAVING APPLICATIONS
See TFC Series for lower cost plating options.
–L
= 15µ" (0,38 µm) Gold on post, Matte Tin on tail (Call Samtec for E.L.P. plating option) Note: Other Gold plating options available. Contact Samtec.
–02 –12 –22 –32
–02
(8,13) .320 (9,91) .390 (11,81) .465 MATED HEIGHT* (5,97) .235 (5,97) .235 (7,75) .305 (7,75) .305 (9,53) .375 (11,43) .450
B
C
LEAD STYLE TFM SFM
–01 –03 –11 –13 –21 –31
–01
*Processing conditions will affect mated height.
(5,59) (1,97) .220 .078 (2,77) –03* (5,59) .220 .109 (1,97) (4,45) –11* (7,37) .290 .078 .175 (2,77) –13* (7,37) .290 .109 (9,14) (1,97) –21* .360 .078 (1,97) –31* (11,05) SINGLE ROW .435 .078 * N/A with 07 or -S row option
–01
LEAD STYLE
(SMT)
A
(5,72) .225 (7,49) .295 (9,27) .365 (11,18) .440
(5,72) .225 (1,27) .050 (1,27) .050
(1,14) .045 (1,27) .050 DIA
–02 –12* –22* –32*
DOUBLE ROW
* N/A with 07, -DH or -S row option
–A (SMT or TH)
(0,46) .018 DIA (1,40) .055 (1,42) .056 (2,35) .093
B C
Note: Some sizes, styles and options are non-standard, non-returnable. THROUGH-HOLE
(0,36) .014
A
(0,64) .025
SURFACE MOUNT
–LC (SMT or TH)
–WT (–01 & –02 ONLY)
WWW.SAMTEC.COM
http://www.Datasheet4U.com
TFM–125–01–L–D–WT
TFM–105–01–L–D–RA
TFM–110–02–L–D–DS
TFML–150–01–L–D–LC
TFM–110–02–L–DH–WT
(1,27 mm) .050" pitch
Shrouded body for blind mating
• Passes 10 Year MFG • Locking option
Surface mount or Through-hole tails Screw down option Mates with SFM for coplanar and perpendicular mating Weld tab option
• Locking clip option • Weld tab option • Screw Down option
ROW OPTION
OPTION
–S
= Single Row (TFM only)
Specify only –RA, –RE1 or –RE2
–RA
= Right Angle (Lead style –01 only)
Specify only –A, –LC, –DS or –WT Not available with –RA, –RE1 and –RE2 unless otherwise noted.
SMT lead styles only Specify only –K or –P
–D
= Double Row
–A
= Alignment Pin
–K
= Polyimide Film Pick & Place Pad
–RE1
= Right Angle Elevated for (1,58 mm) .062" PCB (Requires TFM lead style –01, –D row and –WT)
–DH
= Double Horizontal (TFM lead style –02 only) (05 thru 50 positions only) (–WT standard; –TR option only available)
–LC
= Locking Clip (Manual Placement required)
–P
= Plastic Pick & Place Pad (5 positions minimum) Specify –TR last
–RE2
= Right Angle Elevated for (2,36 mm) .093" PCB (Requires TFM lead style –01, –D row and –WT)
–DS
= Dual Screw Down for (1,60 mm) .062" PCB (05, 07, 10, 15, 20, 25, 30, 35, 40 positions only) (TFM lead styles –01 and –02 onl y) (Requires –D row option) (Mates with SFM–DS option and SFSD/SFSDT –SS and –DS option onl y)
–TR
= Tape & Reel (Not available with –DS)
(2,26) .089
(0,76) .030
(1,91) .075 (0,51) .020 –RA (1,27) .050
–WT
= Weld Tab (TFM lead styles –01 and –02 only) (Standard with –DH) (Mates to SFSS/SFSD –SR and –DR option only) (05, 07, 10, 15, 20, 25, 30, 35, 40, 45, 50 positions only)
–DH
(6,48) .255 (3,81) .150 (1,99) .079
APPLICATION SPECIFIC OPTION
Solder nail option available. Call Samtec.
–DS (–D, –01 & –02 ONLY)
–RE1 & –RE2
WWW.SAMTEC.COM
.