DatasheetsPDF.com

AXX2016 Dataheets PDF



Part Number AXX2016
Manufacturers Advanced XTAL Products
Logo Advanced XTAL Products
Description Quartz Crystal Unit
Datasheet AXX2016 DatasheetAXX2016 Datasheet (PDF)

Specification Oscillator type : Issue: 02 Date: 2006-03-18 AXX2016 Quartz Crystal Unit in SMD package 2.0x1.6 mm RoHS compliant Parameter Frequency range Actual frequency f0 Crystal cut / Vibration mode Load capacitance CL Overtone Adjustment tolerance Frequency stability Frequency stability over temperature range operating temperature range (steady state) min. typ. max. Unit 20 80 MHz MHz AT 8 pF, 10 pF or Series 1 ±15 / ±20 / ±50/ ±100 ppm ppm ± 10 ~ ± 100 ppm 0 +50 °C -10 +60 °C -20 +70 °C.

  AXX2016   AXX2016


Document
Specification Oscillator type : Issue: 02 Date: 2006-03-18 AXX2016 Quartz Crystal Unit in SMD package 2.0x1.6 mm RoHS compliant Parameter Frequency range Actual frequency f0 Crystal cut / Vibration mode Load capacitance CL Overtone Adjustment tolerance Frequency stability Frequency stability over temperature range operating temperature range (steady state) min. typ. max. Unit 20 80 MHz MHz AT 8 pF, 10 pF or Series 1 ±15 / ±20 / ±50/ ±100 ppm ppm ± 10 ~ ± 100 ppm 0 +50 °C -10 +60 °C -20 +70 °C -40 +85 °C ±5 ppm 200 Ω 100 Ω 60 Ω fF 5 pF 20 100 µW 500 MΩ -40 +85 °C 2.0 x 1.6 x 0.5 Frequency (MHz) + Date Code Tape & Reel Condition @ 25°C +-5°C Overall (Note 1) See table below long term (aging) Resonance resistance Rr @ 20 ~ 25 MHz @ >25 ~ 40 MHz @ >40 ~ 80 MHz Motional capacitance C1 Static capacitance C0 Drive level Insulation resistance Storage temperature range Enclosure (see drawing) marking 100 V DC IEC 61637 IEC 60286-3 Packing Notes: 1. Overall frequency stability = initial tolerance + temp. stability + aging (1st year) 2. Terminology and test conditions are according to IEC standard IEC60122-1, unless otherwise stated 3. Measurement technique according to IEC 60444-5 or equivalent Frequency vs. Temperature Stabilities 0° ~ +50°C ± 10 ppm ± 30 ppm ± 50 ppm ± 100 ppm -10° ~ +60°C ± 15 ppm ± 30 ppm ± 50 ppm ± 100 ppm -20° ~ +70°C ± 20 ppm ± 30 ppm ± 50 ppm ± 100 ppm -40 ~ +85°C ± 30 ppm ± 50 ppm ± 100 ppm GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany AXX2016 page 1(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] http://www.Datasheet4U.com Downloaded from Elcodis.com electronic components distributor Enclosure drawing Environmental conditions Test Visual inspection, dimensions Sealing tests Solderability Resistance to soldering heat Shock Bump Free fall Vibration, sinusoidal IEC 60068 Part ... IEC 61178-1 clause ... 4.5 4.6 4.8.2 4.8.3 Test conditions Enclosure styles as in IEC 60122-3, if applicable Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Eb, 4000 bumps per Axes, 40g, 6 ms Test Ed procedure 1, 2 drops from 1m height Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz 1 kHz, 10g Test Na, 10 cycles at extremes of operating temperature range Test Ba, 16 h at upper temperature indicated by climatic category Test Db variant 1 severity b), 55°C/95% r.H., 6 cycles Test Aa, 2 h at lower temperature indicated by climatic category Sequence of 4.8.11, 4.8.12 (1st cycle), 4.8.13, 4.8.12 (5 cycles) Test Ca, 56 days 2-17 2-20 2-27 2-29 2-32 2-6 4.8.8 4.8.6 4.8.9 4.8.7 Rapid change of temperature Dry heat 2-14 2-2 4.8.5 4.8.11 Damp heat, cyclic Cold 2-30 2-1 4.8.12 4.8.13 Climatic sequence Damp heat, steady state Endurance tests - ageing - extended aging 1-7 2-3 4.8.14 4.8.15 4.9.1 4.9.2 30 days @ 85°C 1000h, 2000h, 8000h @85°C GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany AXX2016 page 2(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Downloaded from Elcodis.com electronic components distributor .


MDS-JA20ES AXX2016 ECX-53B


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)