DatasheetsPDF.com

V23134-B0052-C642 Dataheets PDF



Part Number V23134-B0052-C642
Manufacturers TE
Logo TE
Description Power Relay
Datasheet V23134-B0052-C642 DatasheetV23134-B0052-C642 Datasheet (PDF)

Automotive Relays Plug-in Mini ISO Relays Power Relay F4 Pin assignment similar to ISO 7588 part 1 Plug-in or PCB terminals n Also available for 42VDC applications Customized versions on request – 24VDC versions with contact gap >0.8mm – Integrated components (e.g. resistor, diode) – Customized marking/color – Special covers (e.g. notches, release features, brackets) – Various contact arrangements and materials – For latching (bistable) version refer to Power Relay F7 A Latching  or Mini Relay.

  V23134-B0052-C642   V23134-B0052-C642



Document
Automotive Relays Plug-in Mini ISO Relays Power Relay F4 Pin assignment similar to ISO 7588 part 1 Plug-in or PCB terminals n Also available for 42VDC applications Customized versions on request – 24VDC versions with contact gap >0.8mm – Integrated components (e.g. resistor, diode) – Customized marking/color – Special covers (e.g. notches, release features, brackets) – Various contact arrangements and materials – For latching (bistable) version refer to Power Relay F7 A Latching  or Mini Relay Latching – For shrouded/weatherproof dust cover versions refer to Shrouded Power Relay F4 A and VF4 A n n F134co_fcw1 Typical applications Cross carline up to 40A for example: ABS control, blower fans, car alarm, cooling fan, Electric Power Steering, energy management, engine control, fuel pump, heated front screen, lamps: front, rear, fog light, main switch/ supply relay, valves, wiper control. Contact arrangement 1 form A, 1 NO/1 NO (2x87) 1 form U, 2 NO 1 form C, 1 CO Contact gap >0.8mm Rated voltage 12VDC 24VDC 12VDC 24VDC 12VDC 24VDC 24VDC1) Limiting continuous current NO NO NO NO NO/NC NO/NC NO/NC 23°C 60A 60A 2x32A 2x32A 60/45A 60/45A 60/45A 85°C 40A 40A 2x25A 2x25A 40/30A 40/30A 40/30A 125°C 17A 17A 2x11A 2x11A 17/12A 17/12A 17/12A Limiting making current2) NO/NC 120A 120A 2x100A 2x100A 120/45A 120/45A 120/45A Limiting breaking current NO/NC 60A 20A 2x40A 2x15A 60/40A 20/15A 30/20A Limiting short-time current overload current, ISO 8820-33): 1.35 x 40A, 1800s 1.35 x 40A, 1800s 1.35 x 40A, 1800s 2.00 x 40A, 5s 2.00 x 40A, 5s 2.00 x 40A, 5s 3.50 x 40A, 0.5s 3.50 x 40A, 0.5s 3.50 x 40A, 0.5s 6.00 x 40A, 0.1s 6.00 x 40A, 0.1s 6.00 x 40A, 0.1s Jump start test ISO 16750-1 24VDC for 5min conducting nominal current at 23°C Contact material silver based Min. recommended contact load4) 1A at 5VDC Initial voltage drop NO contact at 10A, typ./max. 15/200mV 15/200mV 2x15/200mV 2x15/200mV 15/200mV 15/200mV 15/200mV NC contact at 10A, typ./max. 20/250mV 20/250mV 20/250mV Frequency of operation at nominal load 6 ops./min (0.1Hz) Operate/release time typ. 7/2ms5) Electrical endurance resistive load at 14VDC >2x105 ops. >2x105 ops. >2x105 ops. 40A 2x25A 40A (NO) resistive load at 28VDC >1x105 ops. >1x105 ops. >1x105 ops. 1x105 ops. 20A 2x15A 20A (NO) 30A (NO) >5x105 ops. 10A (NC) Mechanical endurance DC coil >1x107ops. 1) Special high performance 24VDC version with contact gap >0.8mm, part number V23134-A0056-X432/-X433 (see part number table). 2) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of maximum 3s for a make/break ratio of 1:10. 3) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current. 4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/ 5) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher risk of contact tack welding. Contact Data 11-2013, Rev. 1113 www.te.com © 2013 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Automotive Relays Plug-in Mini ISO Relays Power Relay F4 (Continued) Max. load DC breaking capacity 6) Without components in parallel. Insulation Data Initial dielectric strength between open contacts between contact and coil between adjacent contacts Load dump test ISO 7637-1 (12VDC), test pulse 5 ISO 7637-2 (24VDC), test pulse 5 500Vrms 500Vrms 500Vrms Vs=+86.5VDC Vs=+200VDC EU RoHS/ELV compliance compliant Ambient temperature DC coil -40 to +125°C Protection to heat and fire UL94-HB or better7) Climatic cycling with condensation EN ISO 6988 6 cycles, storage 8/16h Temperature cycling IEC 60068-2-14, Nb 10 cycles, -40/+85°C (5°C/min) Load limit curve 1: arc extinguishes during transit time (CO contact). Damp heat cyclic Load limit curve 2: safe shutdown, no stationary arc (NO contact). IEC 60068-2-30, Db, Variant 1 6 cycles, upper air temp. 55°C Load limit curves measured with low inductive resistors verified for 1000 switching events. Damp h.


V23134-A1053-X295 V23134-B0052-C642 V23134-B0052-G242


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)