DatasheetsPDF.com

IRM-8601V-2 Dataheets PDF



Part Number IRM-8601V-2
Manufacturers Everlight Electronics
Logo Everlight Electronics
Description Infrared Remote-control Receiver
Datasheet IRM-8601V-2 DatasheetIRM-8601V-2 Datasheet (PDF)

EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-033 REV: IRM-8601V SERIES ECN: Page: 1.0 1/10 ■ PACKAGE DIMENSIONS: OFFICE: NO 25,Lane 76,Chung Yang Rd, Sec.3 Tucheng, Taipei 236, Taiwan, R.O.C. TEL FAX : 886-2-2267-2000,2266-9936 ( 22 Lines ) : 886-2-2267-6189 http://www.everlight.com EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-033 REV: IRM-8601V SERIES ECN: Page: 1.0 2/10 ■ NOTES: 1. This drawing measure is a standard value. All dimensions are in mill.

  IRM-8601V-2   IRM-8601V-2


Document
EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-033 REV: IRM-8601V SERIES ECN: Page: 1.0 1/10 ■ PACKAGE DIMENSIONS: OFFICE: NO 25,Lane 76,Chung Yang Rd, Sec.3 Tucheng, Taipei 236, Taiwan, R.O.C. TEL FAX : 886-2-2267-2000,2266-9936 ( 22 Lines ) : 886-2-2267-6189 http://www.everlight.com EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-033 REV: IRM-8601V SERIES ECN: Page: 1.0 2/10 ■ NOTES: 1. This drawing measure is a standard value. All dimensions are in millimeter. 2. In case of designation is tolerance ± 0.3mm. 3. Lead spacing is measured where the lead emerge from the package. 4. Protruded resin under flange 1.0mm Max. 5. Lens color: Black. 6. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 7. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT consent. 8. When using this produce, please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 9. Coverage: This specification is applied to the item of infrared receiving device marked "round" in the table below. IR MODULE LIST Items IRM-8601V-1 IRM-8601V-2 IRM-8601V IRM-8601V-5 Carrier Frequencies(Typ) 32.75 kHz 36.00 kHz 38.00 kHz 56.80 kHz EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-033 REV: IRM-8601V SERIES ECN: Page: 1.0 3/10 ■ Description: IRM-8601V series are small and high performance receiving devices for infrared remote control system. Regarding the transmission distance, IRM-8601V is longer than IRM-8601S. The pulse width of IRM-8601V series are stable relating to commander's power or distance between transmitter and receiver. ■ Feature: High protection ability to EMI and metal case can be customized. Mold type and metal case type to meet the design of front panel. Elliptic lens to improve the characteristic against Line-up for various center carrier frequencies. Low voltage and low power consumption. High immunity against ambient light. Photodiode with integrated circuit. TTL and CMOS compatibility. Long reception distance. 10. High sensitivity. 1. 2. 3. 4. 5. 6. 7. 8. 9. ■ Application: 1. Optical switch 2. Light detecting portion of remote control • AV instruments such as Audio, TV, VCR, CD, MD, etc. • Home appliances such as Air-conditioner, Fan , etc. • The other equipments with wireless remote control. • CATV set top boxes • Multi-media Equipment EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-033 REV: IRM-8601V SERIES ECN: Page: 1.0 4/10 ■ Absolute maximum ratings: Parameter Symbol Ratings Supply Voltage Vcc 0~6 -30〜+85 Operating Temperature Topr -40〜+85 Storage Temperature Tstg Soldering Temperature Tsol 260 Unit V ℃ ℃ ℃ (Ta=25℃) Notice 4mm from mold body less than 5 seconds ■ Electro Optical Characteristics: Parameter TYP Symbol MIN Vcc 4.5 5 Supply Voltage Icc Supply Current λp 940 Peak Wavelength L0 10 Transmission Distance L45 5 Half Angle (Horizontal) Half Angle (Vertical) High Level Pulse Width Low Level Pulse Width High Level Output Voltage Low Level Output Voltage MAX 5.5 3 800 800 0.5 Unit V mA nm m deg deg µs µs V V (Ta=25℃) Condition DC voltage No signal input At the ray axis *1 θh θv TH TL VH VL 400 400 4.5 - 45 35 0.2 At the ray axis *2 *1:The ray receiving surface at a vertex and relation to the ray axis in the range of φ= 0° and φ=45°. *2:A range from 30cm to the arrival distance. Average value of 50 pulses. EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-033 REV: IRM-8601V SERIES ECN: Page: 1.0 5/10 ■ TEST METHOD: The specified electro-optical characteristics is satisfied under the following Conditions at the controllable distance. cMeasurement place A place that is nothing of extreme light reflected in the room. dExternal light Project the light of ordinary white fluorescent lamps which are not high Frequency lamps and must be less then 10 Lux at the module surface. (Ee≦10Lux) eStandard transmitter A transmitter whose output is so adjusted as to Vo=400mVp-p and the output Wave form shown in Fig.-1.According to the measurement method shown in Fig.-2 the standard transmitter is specified. However , the infrared photodiode to be used for the transmitter should be λp=940nm,∆λ=50nm. Also, photodiode is used of PD438B (VR=5V). (Standard light / Light source temperature 2856°K). fMeasuring system According to the measuring system shown in Fig.-3 EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-033 IRM-8601V SERIES ECN: REV: Page: 1.0 6/10 ■ Block Diagram: ■ Application Circuit: RC Filter should be connected closely between Vcc pin and GND pin. EVERLIGHT E.


IRM-8601V-1 IRM-8601V-2 IRM-8601V


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)