Technical Specification
NQ40x40QGx30
9-40V
Continuous Input
0-40V
Outputs
30A
Current
NonIsolated
Quarter-brick
DC-D...
Technical Specification
NQ40x40QGx30
9-40V
Continuous Input
0-40V
Outputs
30A
Current
NonIsolated
Quarter-brick
DC-DC Converter
The NiQor Quarter-brick dc-dc converter is a non-isolated buck-boost
regulator, which employs synchronous
Non-Isolated
rectification to achieve extremely high conversion efficiency. The High Input Voltage NiQor Brick family of converters can be used in traditional DPA (distributed power architecture)
0N C3 G Q 40 W 40 Q
Quarter-brick family can be configured to Buck the input voltage down to a lower voltage or Boost the input voltage up to a higher voltage using a single external resistor. These modules are RoHS 6/6 compliant (see page 11).
Operational Features
Ultra high eficiency, up to 95% at full rated load current Delivers up to 30A of output current Input Voltage Range: 9-40V Output voltage range: 0-40V (negative output is possible) Extensive on-board input and output iltering No minimum load requirement means no preload resistors required Buck or buck-boost versions available Adjustable current limit with current monitor (C option)
NiQor Quarter-brick module
Protection Features
Input under-voltage lockout protects the converter at low input voltage conditions Over-current shutdown protects converter from excessive load current or short circuits Input/output over-voltage protection protects load and
regulator from damaging voltages Thermal shutdown protects converter from abnormal environmental conditions
Mechanical Features
Industr...