DatasheetsPDF.com

HCPL-315J Dataheets PDF



Part Number HCPL-315J
Manufacturers Agilent
Logo Agilent
Description 0.5 Amp Output Current IGBT Gate Drive Optocoupler
Datasheet HCPL-315J DatasheetHCPL-315J Datasheet (PDF)

0.5 Amp Output Current IGBT Gate Drive Optocoupler Technical Data HCPL-3150 (Single Channel) HCPL-315J (Dual Channel) Features • 0.5 A Minimum Peak Output Current • 15 kV/µs Minimum Common Mode Rejection (CMR) at VCM = 1500 V • 1.0 V Maximum Low Level Output Voltage (VOL) Eliminates Need for Negative Gate Drive • ICC = 5 mA Maximum Supply Current • Under Voltage Lock-Out Protection (UVLO) with Hysteresis • Wide Operating VCC Range: 15 to 30 Volts • 0.5 µs Maximum Propagation Delay • +/– 0.35 µs .

  HCPL-315J   HCPL-315J


Document
0.5 Amp Output Current IGBT Gate Drive Optocoupler Technical Data HCPL-3150 (Single Channel) HCPL-315J (Dual Channel) Features • 0.5 A Minimum Peak Output Current • 15 kV/µs Minimum Common Mode Rejection (CMR) at VCM = 1500 V • 1.0 V Maximum Low Level Output Voltage (VOL) Eliminates Need for Negative Gate Drive • ICC = 5 mA Maximum Supply Current • Under Voltage Lock-Out Protection (UVLO) with Hysteresis • Wide Operating VCC Range: 15 to 30 Volts • 0.5 µs Maximum Propagation Delay • +/– 0.35 µs Maximum Delay Between Devices/Channels • Industrial Temperature Range: -40°C to 100°C • HCPL-315J: Channel One to Channel Two Output Isolation = 1500 Vrms/1 min. • Safety and Regulatory Approval: UL Recognized (UL1577) 3750 Vrms/1 min. IEC/EN/DIN EN 60747-5-2 Approved VIORM = 630 Vpeak (HCPL-3150 Option 060 only) VIORM = 891 Vpeak (HCPL315J) CSA Certified Description The HCPL-315X consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving IGBTs with ratings up to 1200 V/50 A. For IGBTs with higher ratings, the HCPL-3150/315J can be used to drive a discrete power stage which drives the IGBT gate. N/C 1 2 3 SHIELD Applications • Isolated IGBT/MOSFET Gate Drive • AC and Brushless DC Motor Drives • Industrial Inverters • Switch Mode Power Supplies (SMPS) • Uninterruptable Power Supplies (UPS) Functional Diagram N/C 1 8 VCC VO VO VEE 16 VCC 15 VO 14 VEE ANODE CATHODE ANODE CATHODE N/C 2 3 4 7 6 5 ANODE CATHODE N/C 6 7 8 SHIELD 11 VCC 10 VO 9 VEE SHIELD HCPL-3150 HCPL-315J TRUTH TABLE VCC - VEE “Positive Going” (i.e., Turn-On) 0 - 30 V 0 - 11 V 11 - 13.5 V 13.5 - 30 V VCC - VEE “Negative-Going” (i.e., Turn-Off) 0 - 30 V 0 - 9.5 V 9.5 - 12 V 12 - 30 V LED OFF ON ON ON VO LOW LOW TRANSITION HIGH A 0.1 µF bypass capacitor must be connected between the VCC and VEE pins for each channel. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. 2 Selection Guide: Invertor Gate Drive Optoisolators Package Type 8-Pin DIP (300 mil) Part Number HCPL-3150 HCPL-3120 HCPL-J312 HCPL-J314 Number of 1 1 1 1 Channels IEC/EN/DIN EN VIORM VIORM 60747-5-2 630 Vpeak 891Vpeak Approvals Option 060 UL 3750 3750 Approval Vrms/1 min. Vrms/1 min. Output Peak 0.5A 2A 2A 0.4A Current CMR 15 kV/µ s 10 kV/µ s (minimum) UVLO Yes No Fault Status No Widebody (400 mil) HCNW-3120 1 VIORM 1414 Vpeak 5000 Vrms/1min. 2A Small Outline SO-16 HCPL-315J HCPL-316J HCPL-314J 2 1 2 VIORM 891 Vpeak 3750 Vrms/1 min. 2A 0.5A 15 kV/µ s Yes 0.4A 10 kV/µ s No No Yes Ordering Information Specify Part Number followed by Option Number (if desired) Example HCPL-315Y#XXXX No Option = Standard DIP package, 50 per tube. 060 = IEC/EN/DIN EN 60747-5-2 VIORM = 630 Vpeak Option, 50 per tube. (HCPL-3150 only) 300 = Gull Wing Surface Mount Option, 50 per tube. (HCPL-3150 only) 500 = Tape and Reel Packaging Option. XXXE = Lead Free Option ∅ = Single Channel, 8-pin PDIP. J = Dual Channel, SO16. Option data sheets available. Contact Agilent sales representative or authorized distributor. Remarks: The notation “#” is used for existing products, while (new) products launched since 15th July 2001 and lead free option will use “–” HCPL-3150; 1000 per reel. HCPL-315J; 850 per reel. Package Outline Drawings Standard DIP Package 8 9.40 (0.370) 9.90 (0.390) 7 6 5 OPTION CODE* DATE CODE 6.10 (0.240) 6.60 (0.260) 7.36 (0.290) 7.88 (0.310) 0.20 (0.008) 0.33 (0.013) A 3150 Z YYWW PIN ONE 1.19 (0.047) MAX. 1 2 3 4 5° TYP. 1.78 (0.070) MAX. 3.56 ± 0.13 (0.140 ± 0.005) PIN ONE 4.70 (0.185) MAX. DIMENSIONS PIN IN MILLIMETERS AND (INCHES). DIAGRAM 0.51 (0.020) MIN. 2.92 (0.115) MIN. * MARKING LETTER 8 OPTION NUMBERS. VDD1 VDD2FOR 1 CODE "V" = OPTION 060. OPTION NUMBERS AND 500 7 NOT MARKED. 2 VIN+ 300 VOUT+ NOTE: FLOATING IS 0.25 mm (10 mils) MAX. 6 3 V LEAD V PROTRUSION IN– OUT– 0.76 (0.030) 1.40 (0.055) 0.65 (0.025) MAX. 2.28 (0.090) 2.80 (0.110) 4 GND1 GND2 5 3 Package Outline Drawings Gull-Wing Surface-Mount Option 300 LAND PATTERN RECOMMENDATION 9.65 ± 0.25 (0.380 ± 0.010) 8 7 6 5 OPTION CODE* 1.016 (0.040) A 3150 Z YYWW 6.350 ± 0.25 (0.250 ± 0.010) 10.9 (0.430) MOLDED 1 2 3 4 1.27 (0.050) 2.0 (0.080) 1.19 (0.047) MAX. 1.780 (0.070) MAX. 9.65 ± 0.25 (0.380 ± 0.010) 7.62 ± 0.25 (0.300 ± 0.010) 0.20 (0.008) 0.33 (0.013) 3.56 ± 0.13 (0.140 ± 0.005) 1.080 ± 0.320 (0.043 ± 0.013) 2.540 (0.100) BSC 0.635 ± 0.130 (0.025 ± 0.005) 0.635 ± 0.25 (0.025 ± 0.010) 12° NOM. DIMENSIONS IN MILLIMETERS (INCHES). TOLERANCES (UNLESS OTHERWISE SPECIFIED): xx.xx = 0.01 xx.xxx = 0.005 LEAD COPLANARIT.


V5011S1096 HCPL-315J A3150


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)