DatasheetsPDF.com

dsPIC33EP128GM304 Dataheets PDF



Part Number dsPIC33EP128GM304
Manufacturers Microchip
Logo Microchip
Description 16-Bit Digital Signal Controllers
Datasheet dsPIC33EP128GM304 DatasheetdsPIC33EP128GM304 Datasheet (PDF)

dsPIC33EPXXXGM3XX/6XX/7XX 16-Bit Digital Signal Controllers with High-Speed PWM, Op Amps and Advanced Analog Features Operating Conditions • 3.0V to 3.6V, -40°C to +85°C, up to 70 MIPS • 3.0V to 3.6V, -40°C to +125°C, up to 60 MIPS Core: 16-Bit dsPIC33E CPU • Code-Efficient (C and Assembly) Architecture • Two 40-Bit Wide Accumulators • Single-Cycle (MAC/MPY) with Dual Data Fetch • Single-Cycle Mixed-Sign MUL plus Hardware Divide • 32-Bit Multiply Support Clock Management • Internal Fast FRC Osc.

  dsPIC33EP128GM304   dsPIC33EP128GM304



Document
dsPIC33EPXXXGM3XX/6XX/7XX 16-Bit Digital Signal Controllers with High-Speed PWM, Op Amps and Advanced Analog Features Operating Conditions • 3.0V to 3.6V, -40°C to +85°C, up to 70 MIPS • 3.0V to 3.6V, -40°C to +125°C, up to 60 MIPS Core: 16-Bit dsPIC33E CPU • Code-Efficient (C and Assembly) Architecture • Two 40-Bit Wide Accumulators • Single-Cycle (MAC/MPY) with Dual Data Fetch • Single-Cycle Mixed-Sign MUL plus Hardware Divide • 32-Bit Multiply Support Clock Management • Internal Fast FRC Oscillator with 1% Accuracy • Programmable PLLs and Oscillator Clock Sources • Fail-Safe Clock Monitor (FSCM) • Independent Watchdog Timer (WDT) • Fast Wake-up and Start-up Power Management • Low-Power Management modes (Sleep, Idle, Doze) • Executing Optimized NOP String with Flash Fetch • Integrated Power-on Reset and Brown-out Reset • 0.6 mA/MHz Dynamic Current (typical) • 30 µA IPD Current (typical) High-Speed PWM • Up to 12 PWM Outputs (six generators) • Primary Master Time Base Inputs allow Time Base Synchronization from Internal/External Sources • Dead Time for Rising and Falling Edges • 7.14 ns PWM Resolution • PWM Support for: - DC/DC, AC/DC, Inverters, PFC, Lighting - BLDC, PMSM, ACIM, SRM • Programmable Fault Inputs • Flexible Trigger Configurations for ADC Conversions • Supports PWM Lock, PWM Output Chopping and Dynamic Phase Shifting Advanced Analog Features • Two Independent ADC modules: - Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H - 11, 13, 18, 30 or 49 analog inputs • Flexible and Independent ADC Trigger Sources • Up to Four Op Amp/Comparators with Direct Connection to the ADC module: - Additional dedicated comparator - Programmable references with 32 voltage points - Programmable blanking and filtering • Charge Time Measurement Unit (CTMU): - Supports mTouch™ capacitive touch sensing - Provides high-resolution time measurement (1 ns) - On-chip temperature measurement Timers/Output Compare/Input Capture • 21 General Purpose Timers: - Nine 16-bit and up to four 32-bit timers/counters - Eight output capture modules configurable as timers/counters - PTG module with two configurable timers/counters - Two 32-bit Quadrature Encoder Interface (QEI) modules configurable as a timer/counter • Eight Input Capture modules • Peripheral Pin Select (PPS) to allow Function Remap • Peripheral Trigger Generator (PTG) for Scheduling Complex Sequences Communication Interfaces • Four Enhanced Addressable UART modules (17.5 Mbps): - With support for LIN/J2602 protocols and IrDA® • Three 3-Wire/4-Wire SPI modules (15 Mbps) • 25 Mbps Data Rate for Dedicated SPI module (with no PPS) • Two I2C™ modules (up to 1 Mbps) with SMBus Support • Two CAN modules (1 Mbps) with CAN 2.0B Support • Programmable Cyclic Redundancy Check (CRC) • Codec Interface module (DCI) with I2S Support Direct Memory Access (DMA) • 4-Channel DMA with User-Selectable Priority Arbitration • Peripherals Supported by the DMA Controller include: - UART, SPI, ADC, CA.


PIC24EP512GU814 dsPIC33EP128GM304 dsPIC33EP128GM604


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)