2.0A High-Side Power Switch
YB1901
2.0A High-Side Power Switch with Flag
Description
The YB1901 is a low operation voltage, single N-channel MOSFET ...
Description
YB1901
2.0A High-Side Power Switch with Flag
Description
The YB1901 is a low operation voltage, single N-channel MOSFET high-side power switch, optimized for low power consumption system. A small internal charge-pump circuitry is built in the YB1901 to drive the internal MOSFET switch for reaching an average RDS(ON) resistance of 120mΩ. A fault flag output is available to indicate an abnormal condition during operation. Some other features include low in-rush current during plug-in, thermal shutdown to prevent switch failure from high-current loads, under-voltage lock-out to keep the chip off when below normal operation supply, a short-circuit protection to avoid grounded big current. The quiescent current needed to run the change-pump is as low as 60μA at 5V input. It makes the device ideal for portable battery operated system. The YB1901 power switch is available in SOT-25, MSOP8, SOP8 packages.
Features
Built-In N-Channel MOSFET Typical RDS(ON) Resistance : 120 mΩ Low Quiescent Current : 60μA at 5V Low Shutdown Current : <1μA Current Limit at 2.0A Wide Input Voltage Range : 2.7 ~ 5.5V Hot Plug-In Application 2.4V Under-Voltage Lock-Out Thermal Shutdown Protection Short-Circuit Protection Reverse Current Flow Blocking
Open-Drain Fault Flag SOT-25, MSOP8, SOP8 Packages Green Package (RoHS) Available
Applications
PDA, DSC, GPS USB Peripherals PC Cards PCMCIA Cards Notebook PC Battery-Charger Circuits Battery-Powered Instruments
...
Similar Datasheet