AX8401 COMPLEMENTARY OUTPUT HALL EFFECT LATCH
GENERAL DESCRIPTION AX8401 is a single-digital-output Hall-Effect latch ...
AX8401 COMPLEMENTARY OUTPUT HALL EFFECT LATCH
GENERAL DESCRIPTION AX8401 is a single-digital-output Hall-Effect latch sensor for high temperature operation. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify Hall voltage, a comparator to provide switching hysteresis for noise rejection, and an output driver. An internal bandgap
regulator provides a temperature compensated supply voltage for internal circuits and allows a wide operating supply range. When the magnetic flux density (B) is larger than operate point (Bop), output is switched on (OUT pin is pulled low). The output state is held on until a magnetic flux density reversal falls below Brp. When B is less than Brp, the output is switched off. The AX8401 is available in SIP-3L package. FEATURES Bipolar Hall-Effect latch sensor 4.5V to 28V DC operating voltage 20mA output sink current Board Operating temperature range of -40°C to +125°C Green package: SIP-3L
BLOCK DIAGRAM
VCC 1
VÛmw`RyÑb€
w.goftechm
REG 3 + AMP OUT
2
GND
1/6
Axelite Confidential Materials, do not copy or distribute without written consent. Rev.1.0 Jul. 25, 2011
AX8401
PIN ASSIGNMENT The package of AX8401 is SIP-3L; the pin assignment is given by:
(Top View)
AX8401
Name VCC GND OUT
Description
Positive Power Supply Ground Output Stage
1 VCC
2 GND
3 OUT
ORDER/MARKING INFORMATION Order Information
Top Marking
Logo
AX8401 XX X
Package Type I3: SIP-3L Packing Blank: Bag A : Taping €
...