Smart motor driver
FEELING TECHNOLOGY
Features
Motor driver with integrated Hall sensor Lock-shutdown protection & auto-restart function Pr...
Description
FEELING TECHNOLOGY
Features
Motor driver with integrated Hall sensor Lock-shutdown protection & auto-restart function Precise magnetic switching thresholds “Soft-switch” phase-switching technique to reduce vibration and acoustic noise Thermal shutdown protection Built-in FG(frequency generation) signal output Available in SIP-5L, SOT89-5L packages For 12V systems
FD115CH FD115CA
Smart motor driver with embedded Hall sensor
Halogen Free
General Description
FD115CH/FD115CA is a two coil motor driver with embedded Hall sensor. It integrates the motor driver with the Hall sensor, which simplifies the PCB(printed circuit board) design and make the fabrication of small-size motors possible. Lock-shutdown and auto-restart function keeps the motor from being over-heated and restarts the motor after being locked. “Soft-switch” phase-switching technique is used to reduce the vibration and acoustic noise. Thermal-shutdown protection ensures the motor driver to operate under specified temperature ranges. All the protection mechanisms mentioned above combine to provide a complete protecting scenario for the motor system, keep the motor system from possible damages and guarantee correct operations.
Block Diagram
Bias Generator
Hall Plate
Chopper amplifier
Oscillator
Coil Driver
Digital control logics Power On Reset
Figure.1
This datasheet contains new product information. Feeling Technology reserves the rights to modify the product specification without notice. No liability is ...
Similar Datasheet