STK621-061-E

Ordering number : ENA1032A STK621-061-E Thick-Film Hybrid IC 3-Phase Motor Drive Inverter Hybrid IC Overview http://onsemi.com This IC is a 3-phase inverter power hybrid IC containing power elements (IGBT and FRD), pre-driver, overcurrent and excessive temperature protection circuit. Application 3-phase inverter motor drive Features Integrates power elements (IGBT and FRD), pre-driver, and protective circuit. Protective circuits including overcurrent (bus line), excessive temperature and pre-drive low voltage protection are built in. Direct input of CMOS level control signals without an insulating circuit (photocoupler, etc) is possible. Single power supply drive is possible by using a bootstrap circuit with a built-in IC Temperature monitor is possible by the thermistor inside the IC Built-in simultaneous upper/lower ON prevention circuit to prevent arm shorting through simultaneous ON input for the upper and lower side transistors. (Dead time is required for preventing shorting due to switching delay.) SIP (The single in-line package) of the transfer full mold structure. Semiconductor Components Industries, LLC, 2013 July, 2013 O0312HKPC 013-06-0028 No.A1032-1/8 STK621-061-E Specifications Absolute Maximum Ratings at Tc = 25°C Parameter Supply voltage Collector-emitter voltage Output current Output peak current Pre-driver supply voltage Input signal voltage FAULT terminal voltage Maximum loss Junction temperature Storage temperature Operating temper...