Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers
5 V, Slew-Rate Limited, Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers
ADM4850/ADM4851/ADM4852/ADM4853/ADM4854/A...
Description
5 V, Slew-Rate Limited, Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers
ADM4850/ADM4851/ADM4852/ADM4853/ADM4854/ADM4855/ADM4856/ADM4857
FEATURES
EIA RS-485-/RS-422-compliant Data rate options ADM4850/ADM4854: 115 kbps ADM4851/ADM4855: 500 kbps ADM4852/ADM4856: 2.5 Mbps ADM4853/ADM4857: 10 Mbps Half- and full-duplex options Reduced slew rates for low EMI True fail-safe receiver inputs 5 μA (maximum) supply current in shutdown mode Up to 256 transceivers on one bus Outputs high-Z when disabled or powered off −7 V to +12 V bus common-mode range Thermal shutdown and short-circuit protection Pin-compatible with the MAX308x Specified over the −40°C to +85°C temperature range Available in 8-lead SOIC, LFCSP, and MSOP packages Qualified for automotive applications
FUNCTIONAL BLOCK DIAGRAMS
VCC
ADM4850/ADM4851/ ADM4852/ADM4853
RO RE DE DI D
04931-001
R A B
GND
Figure 1.
VCC
ADM4854/ADM4855/ ADM4856/ADM4857
A RO R B Z DI D Y
04931-028
APPLICATIONS
Low power RS-485 applications EMI-sensitive systems DTE-DCE interfaces Industrial control Packet switching Local area networks Level translators
GND
Figure 2.
GENERAL DESCRIPTION
The ADM4850/ADM4851/ADM4852/ADM4853/ADM4854/ ADM4855/ADM4856/ADM4857 are differential line transceivers suitable for high speed half- and full-duplex data communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with EIA Standards RS-485 and RS-422. The ADM4850/ADM4851/ADM4852/ADM4853 are halfdup...
Similar Datasheet