Ultra Low Capacitance Single-Line ESD Protection Array
SPE0589
Single-Line ESD Protection Array
DESCRIPTION The SPE0589 is an one direction TVS device that is to protect sens...
Description
SPE0589
Single-Line ESD Protection Array
DESCRIPTION The SPE0589 is an one direction TVS device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. SPE0589 will protect single line, and may be used on line where the signal polarities swing above and below ground. SPE0589 offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. SPE0589 may be used to meet the immunity requirements
of IEC 61000-4-2, level 4. The small DFN1.0x0.6-2L
package makes them ideal for use in portable electronics such as cell phones, PDA’s, notebook computers, and
digital cameras.
APPLICATIONS Near Field Communications Cordless Phone RF Signal ESD Protection RF Switching, PA and Antenna ESD Protection HDMI 1.2~2.1 USB2.0/USB3.0 and Type C
FEATURES Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Protects single I/O lines Working voltage: 5V Low leakage current Low operating and clamping voltages
PIN CONFIGURATION ( DFN1.0x0.6-2L )
2020/06/18 Ver.5
PART MARKING
M: Month Code X: Device Code
Page 1
SPE0589
Single-Line ESD Protection Array
ORDERING INFORMATION
Part Number
Package
SPE0589DN2RGB
DFN1.0x0.6-2L
※ SPE0589DN2RGB : Tape Reel ; Pb – Free, Halogen Free
Part Marking Mx
ABSOULTE MAXIMUM RATINGS (TA=25℃...
Similar Datasheet