Document
SPE0592
Single-Line ESD Protection Array
DESCRIPTION The SPE0592 is a bi-direction TVS device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. SPE0592 will protect single line, and may be used on line where the signal polarities swing above and below ground. SPE0592 offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. SPE0592 may be used to meet the immunity requirements
of IEC 61000-4-2, level 4. The small DFN1.0x0.6-2L
package makes them ideal for use in portable electronics such as cell phones, PDA’s, notebook computers, and
digital cameras.
APPLICATIONS Near Field Communications Cordless Phone RF Signal ESD Protection RF Switching, PA and Antenna ESD
Protection HDMI 1.2~2.1 USB2.0/USB3.0 and Type C
FEATURES Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Protects single I/O lines Working voltage: 5V Low leakage current Low operating and clamping voltages
PIN CONFIGURATION (DFN1.0x0.6-2L)
PART MARKING
2020/06/18 Ver.5
Page 1
SPE0592
Single-Line ESD Protection Array
ORDERING INFORMATION
Part Number
Package
SPE0592DN2RGB
DFN1.0x0.6-2L
※ SPE0592DN2RGB: Tape Reel ; Pb Free, Halogen Free
Part Marking O
ABSOULTE MAXIMUM RATINGS (TA=25℃ Unless otherwise noted)
Parameter Peak Pulse Power ( tp = 8/20 μs ) Maximum Peak Pulse Current ( tp = 8/20 μs ) ESD per IEC 61000 – 4 – 2 (Air ) ESD per IEC 61000 – 4 – 2 (Contact ) Operating Junction Temperature Storage Temperature Range Lead Soldering Temperature
Symbol
Typical
Unit
Ppk
60
W
Ipp
4
A
Vpp
±15
KV
Vpp
±8
KV
TJ
-55 ~ 125
℃
TSTG
-55 ~ 150
℃
TL
260 ( 10sec )
℃
ELECTRICAL CHARACTERISTICS (TA=25℃ Unless otherwise noted)
Parameter
Symbol
Conditions
Min. Typ Max. Unit
Reverse Stand – Off Voltage
VRWM
Reverse Breakdown Voltage
VBR It = 1mA
6
Reverse Leakage Current
IR VRWM = 5V , T=25℃
Reverse Leakage Current
IR VRWM = 3.3V , T=25℃
Clamping Voltage Clamping Voltage, TLP(Note 1) Junction Capacitance Dynamic Resistance
VC VC Cj RDYN
Ipp = 1A , tp = 8/20 μs Ipp = 8A VR = 0V , f = 1MHz TLP Pulse
Notes: 1) TLP parameter: Z0 = 50Ω, tp = 100ns, tr = 10ns, averaging window from 70ns to 90ns.
5
V
V
0.04 0.5 μA
0.03 0.2 μA
13 V
24
V
0.3 0.35 pF
1.8
Ω,
2020/06/18 Ver.5
Page 2
SPE0592
Single-Line ESD Protection Array
TYPICAL CHARACTERISTICS
IDUT (A) .
20 18 16 14 12 10
8 6 4 2 0 -2
-0.5
SPE0592
9.5
19.5
29.5
39.5
49.5
59.5
VDUT (V)
Fig. 1 Typical TLP IV Curve
2020/06/18 Ver.5
Page 3
SPE0592
Single-Line ESD Protection Array
Information provided is alleged to be exact and consistent. SYNC Power Corporation presumes no responsibility for the penalties of use of such information or for any violation of patents or other rights of third parties which may result from its use. No license is granted by allegation or otherwise under any patent or patent rights of SYNC Power Corporation. Conditions mentioned in this publication are subject to change without notice. This publication surpasses and replaces all information previously supplied. SYNC Power Corporation products are not authorized for use as critical components in life support devices or systems without express written approval of SYNC Power Corporation.
© The SYNC Power logo is a registered trademark of SYNC Power Corporation © 2020 SYNC Power Corporation – Printed in Taiwan – All Rights Reserved SYNC Power Corporation 7F-2, No.3-1, Park Street NanKang District (NKSP), Taipei, Taiwan, 115, R.O.C Phone: 886-2-2655-8178 Fax: 886-2-2655-8468 © http://www.syncpower.com
2020/06/18 Ver.5
Page 4
.