Current Mode PWM Power Switch
Preliminary GR8935M
Current Mode PWM Power Switch
Features
Current mode PWM Very low startup cur...
Description
Preliminary GR8935M
Current Mode PWM Power Switch
Features
Current mode PWM Very low startup current Under-voltage lockout (UVLO) Non-audible-noise green-mode control Fixed switching frequency of 50KHz Cycle-by-cycle peak current limiting Internal leading-edge blanking Internal slope compensation Internal 5ms soft start VCC over voltage clamp Over-voltage protection (OVP) on VCC Pin Over-load protection (OLP)
Description
GR8935M integrates a PWM controller and high voltage power MOSFET of 650V. GR8935M has the features of very low startup current and current mode PWM control with green-mode function at light load. These features enable the power supply to easily meet even the strictest power conservation requirements. The integrated functions of GR8935M also include the leading-edge blanking of the current sensing, internal slope compensation, cycle-by-cycle peak current limiting and soft start. OCP, OVP and OLP provide protection performance for fault conditions. To protect the power MOSFET from being damaged by supply over voltage, the internal
Applications
Switching AC/DC power battery charger Digital camera Open-frame SMPS PDA power supply
gate voltage of GR8935M is clamped at 18V. GR8935M improves the performance and reduces the cost of power supplies.
Ordering and Marking Information
GR8935M
Package Code
J: DIP-8
DIP-8
RoHS Code
G: Green (Halogen Free) Device L : PB Free Device
GR8935M X X XXX
Code 1 Code 2 Serial No.
Code 1 Year
...
Similar Datasheet