High Power Factor Flyback PWM Controller
High Power Factor Flyback PWM Controller
SN03A
Product Specification
GENERAL DESCRIPTION
SN03A is a high power factor...
Description
High Power Factor Flyback PWM Controller
SN03A
Product Specification
GENERAL DESCRIPTION
SN03A is a high power factor flyback PWM controller special for lighting applications. SN03A features an internal start-up timer for stand-alone applications, an analog multiplier with for power factor correction (PFC), zero current detector (ZCD) to ensure TM operation, a current sensing comparator with built-in leading-edge blanking, and a totem pole output ideally suited for driving a power MOSFET. SN03A offers great protection coverage including system VCC under voltage lockout (UVLO),VCC over voltage protection, Cycle-by-cycle current limiting, and gate drive output clamping for external power MOSFET protection.
FEATURES
Low Start-up Current and Operating Current Cycle-by-Cycle Current Limiting Internal Leading Edge Blanking Analog multiplier for Power Factor Correction Internal Startup Timer for Stand-alone Applications Trimmed 1.5% Internal Band gap Reference Under Voltage Lockout with Hysteresis VCC over voltage protection Transition Mode (TM) Operation Totem Pole Output with High State Clamping Audio Noise Free 11V to 32V wide range of VCC voltage
APPLICATIONS
Single Stage High PF Flyback AC/DC SMPS LED Lighting Power
TYPICAL APPLICATION
©On-Bright Electronics
Confidential -1-
Preliminary Datasheet OB_DOC_DS_SN03A00
High Power Factor Flyback PWM Controller
SN03A
GENERAL INFORMATION
Terminal Assignment In SOP8 or DIP8 Package.
FB 1 8 VCC
CO...
Similar Datasheet