MT9N001

Aptina Confidential and Proprietary MT9N001: 1/2.3-Inch 9Mp CMOS Digital Image Sensor Features 1/2.3-Inch 9Mp CMOS Digital Image Sensor MT9N001 Data Sheet For the latest data sheet, refer to Aptina’s Web site: www.aptina.com Features DigitalClarity® CMOS imaging technology Simple two-wire serial interface Auto black level calibration Support for external mechanical shutter Support for external LED or xenon flash High frame rate preview mode with arbitrary downsize scaling from maximum resolution Programmable controls: gain, horizontal and vertical blanking, auto black level offset correction, frame size/rate, exposure, left–right and top–bottom image reversal, window size, and panning Data interfaces: parallel- or CCP2-compliant sublow-voltage differential signalling (sub-LVDS) or one/two lane serial mobile industry processor interface (MIPI) On-die phase-locked loop (PLL) oscillator Bayer pattern down-size scaler Integrated position-based color and lens shading correction One-time programmable (OTP) memory for storing module information Table 1: Key Performance Parameters Value 1/2.3-inch (4:3) 6.104mm(H) x 4.578mm(V) 7.63mm diagonal 3488H x 2616V 1.75 x 1.75μm 0° RGB Bayer pattern Electronic rolling shutter (ERS) with global reset release (GRR) 6–48 MHz 96 Mp/s at 96 MHz PIXCLK 640 Mbps 1.536 Gbps Programmable up to 13.2 fps serial, 9.7 fps parallel 30 fps VGA binning with 8Mp field-of-view 12-bit, on-die 0.44 V/lux-sec (550nm) 65dB 35dB 1.7–...