TD62064BP1G/BFG
TOSHIBA Bipolar Digital Integrated Circuit Silicon Monolithic
TD62064BP1G,TD62064BFG
4ch High-Current D...
TD62064BP1G/BFG
TOSHIBA Bipolar Digital Integrated Circuit Silicon Monolithic
TD62064BP1G,TD62064BFG
4ch High-Current Darlington Sink Driver
The TD62064BP1G and TD62064BFG are high-voltage, high-current darlington drivers comprised of four
NPN darlington pairs. All units feature integral clamp diodes for switching inductive loads. Applications include relay, hammer, lamp and stepping motor drivers.
TD62064BP1G
Features
Package type BP1G: DIP16 pin BFG: HSOP16 pin
TD62064BFG
High output sustaining voltage: VCE (SUS) = 80 V (min) Output current (single output): IOUT = 1.5 A/ch (max) Output clamp diodes Input compatible with TTL and 5 V CMOS GND and SUB terminal = Heat sink
Pin Assignment (top view)
TD62064BP1G
O4 16 NC 15 I4 14 Heat sink & GND 13 12 I3 11 NC 10 O3 9
Weight DIP16-P-300-2.54A: 1.11 g (typ.) HSOP16-P-300-1.00: 0.50 g (typ.)
1 COM
2 O1
3 I1
4
5
Heat sink & GND
6 I2
7 O2
8 COM
TD62064BFG
O4 16 NC 15 I4 14 NC 13 Heat sink & GND NC 12 I3 11 NC 10 O3 9
1 COM
2 O1
3 I1
4 NC
Heat sink & GND
5 NC
6 I2
7 O2
8 COM
Note: The NC pins are not connected to the die. If wiring is required, it is recommended to connect the pins to the Heat sink & GND line(s).
1
2009-10-01
TD62064BP1G/BFG
Schematics (each driver)
TD62064BP1G/BFG
COMMON Input 8.2 kΩ 230 Ω 1.1 kΩ Output
GND
Note: The input and output parasitic diodes cannot be used as clamp diodes.
Precautions for Using
(1) This IC does not include built-in protection circuits for excess cur...