EE-2002

EE-2001/2002 NPN to PNP Conversion Connector for Amplified Photomicrosensors H Converts NPN output to PNP output by easy connection to amplified photomicrosensors H Easy solution to achieve PNP output as required in the U.S. and Europe Ordering Information Applicable amplified photomicrosensor models EE-SPX301 EE-SPX401 EE-SPY301 EE-SPY401 EE-SX670/-A EE-SX671/-A EE-SX672/-A EE-SX673/-A EE-SPY302 EE-SPY402 EE-SPZ301-A EE-SPZ401-A EE-SX470 EE-SX471 EE-SX472 EE-SX473 EE-SPZ301Y-01 EE-SPZ401Y-01 EE-SPZ301W-01 EE-SPZ401W-01 EE-SPY311 EE-SPY312 EE-SPY411 EE-SPY412 EE-SPZ301W-02 EE-SPZ401W-02 EE-SPZ301 EE-SPZ401 EE-SY671 EE-SY672 EE-SPX303/403 EE-SPX311/411 EE-SB5V/-E EE-SB5VC EE-SB5M EE-SB5MC EE-2002 Part number EE-2001 Specifications Note: TA= 25° C (77°F), 65% RH Item Supply voltage* Consumption current Control output Ambient temperature p Ambient humidity y Operating Storage Operating Storage Value 5 V to 24 VDC ±10%, ripple (p-p): 5% max. 5 mA max. under the following conditions: Connector side: ¨=open, short circuit between IN and © Cord side: ¨=26.4V, OUT= open, © = 0 V 100 mA max. (Residual voltage = 0.8 V max.) -10°C to 55°C (14°F to 131°F) -25°C to 65°C (-13°F to 149°F) 5 to 85% RH 5 to 95% RH *Use the indicated supply voltages for the specified products below: Supply voltage 12 to 24 VDC ±10%, ripple (p-p): 5% max. 5 to 15 VDC ±10%, ripple (p-p): 5% max. 5 to 12 VDC ±10%, ripple (p-p): 5% max. Part number EE-SPX303, EE-SPX403 EE-SB5V/-E, EE-SB5VC EE-SB5M, EE-SB5MC EE...