Surface Mount Termination
Model C200N50Z4
Surface Mount Termination 200 Watts, 50Ω
Description
The C200N50Z4 is high performance Aluminum Nitride ...
Description
Model C200N50Z4
Surface Mount Termination 200 Watts, 50Ω
Description
The C200N50Z4 is high performance Aluminum Nitride (AlN) surface mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating high power 90 degree couplers and for use in microstrip circuits. The termination is also RoHS compliant!
General Specifications Features:
RoHS Compliant 200 Watts DC - 2.2 GHz AlN Ceramic Non-Nichrome Resistive Element Low VSWR
100% Tested Small Size Resistive Element Substrate Terminal Finish Operating Temperature Thick film AlN Ceramic Matte Tin over Nickel Barrier -50 to +200°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value: Power: Frequency Range: Return Loss 50 Ohms, ± 2% 200 Watts DC – 2.2 GHz >20 dB to 2.2 GHz
Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
1 of 2 Available on Tape and Reel For Pick and Place Manufacturing.
USA/Canada: Toll Free: Europe:
(315) 432-8909 (800) 544-2414 +44 2392-232392
Model C200N50Z4
Typical Performance: C...
Similar Datasheet