• RoHS Compliant
• 50 Watts
• DC – 2.7 GHz
• Al2O3 Ceramic
• Non-Nichrome Resistive
• Low VSWR
• 100% Tested
• Small Size
Surface Mount Termination
50 Watts, 50Ω
The C50A50Z4 is high performance Alumina (Al203) surface mount
termination intended as a low cost alternative to Aluminum Oxide (AlN).
The termination is well suited to all cellular frequency bands such as;
AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating high power 90 degree couplers, and
for use in microstrip circuits. The termination is also RoHS compliant!
Matte Tin over Nickel Barrier
Operating Temperature -55 to +125°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
50 Ohms, ± 2%
DC – 2.7 GHz
> 26 dB to 2.2 GHz
> 24 dB to 2.7 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
C50A50Z4 (097) rev.F pg. 1 of 2
Available on Tape
USA/Canada: (315) 432-8909
and Reel For Pick and
Toll Free: (800) 544-2414