Surface Mount Termination
Model C50A50Z4
Surface Mount Termination 50 Watts, 50Ω
Description
The C50A50Z4 is high performance Alumina (Al203) surf...
Description
Model C50A50Z4
Surface Mount Termination 50 Watts, 50Ω
Description
The C50A50Z4 is high performance Alumina (Al203) surface mount termination intended as a low cost alternative to Aluminum Oxide (AlN). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating high power 90 degree couplers, and for use in microstrip circuits. The termination is also RoHS compliant!
General Specifications Features:
RoHS Compliant 50 Watts DC – 2.7 GHz Al2O3 Ceramic Non-Nichrome Resistive Element Low VSWR
100% Tested Small Size Resistive Element Substrate Terminal Finish Operating Temperature Thick film Al2O3 Ceramic Matte Tin over Nickel Barrier -55 to +125°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value: Power: Frequency Range: Return Loss 50 Ohms, ± 2% 50 Watts DC – 2.7 GHz > 26 dB to 2.2 GHz > 24 dB to 2.7 GHz
Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
C50A50Z4 (097) rev.F pg. 1 of 2
Available on Tape and Reel For Pick and Place Manufacturing.
USA/Canada: Toll Free: Europe:
(315) 432-8909 (800) 544-2414 +44 2392-232392
Model C50A50Z4
Typical Performance:
Power De-rating:
Tape ...
Similar Datasheet