Surface Mount Termination
Model C8A50Z4A
Surface Mount Termination 8 Watts, 50Ω
Description
The C8A50Z4A is high performance Alumina (Al203) Surfa...
Description
Model C8A50Z4A
Surface Mount Termination 8 Watts, 50Ω
Description
The C8A50Z4A is high performance Alumina (Al203) Surface Mount termination intended as a low cost alternative to Aluminum Nitride (AlN). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The termination is also RoHS compliant!
General Specifications Features:
RoHS Compliant 8 Watts DC – 6.0 GHz Al203 Ceramic Non-Nichrome Resistive Element Low VSWR
100% Tested Small Size Resistive Element Substrate Terminal Finish Operating Temperature Thick film Al2O3 Ceramic Matte Tin over Nickel Barrier -55 to +125°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet or exceed applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value: Power: Frequency Range: Return Loss 50 Ohms, ± 2% 8 Watts DC – 6.0 GHz >19 dB
Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
HATCHED AREA(S) INDICATE LOCATION OF PLATED SURFACES
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
1 of 2
USA/Canada: Toll Free: Europe:
(315) 432-8909 (800) 544-2414 +44 2392-232392
Model C8A50Z4A
Typical Performance:
C8A50Z4A C8A50Z4A
Power De-rating:
Mounting Footprint and Procedure:
*Actual performance could be limited by the solder properties of the application
Tape and Reel:...
Similar Datasheet