MIC5524
High-Performance 500mA LDO in Thin DFN Package
General Description
The MIC5524 is a low-power, µCap, low dropou...
MIC5524
High-Performance 500mA LDO in Thin DFN Package
General Description
The MIC5524 is a low-power, µCap, low dropout
regulator designed for optimal performance in a very-small footprint. It is capable of sourcing 500mA of output current and only draws 38µA of operating current to do so. The MIC5524 includes an auto-discharge feature on the output that is activated when the enable pin is low and it has an internal pull down resistor on the enable pin that will disable the output when the enable pin is left floating, this is ideal for applications where the control signal is floating during processor boot up. This high-performance LDO offers fast transient response and good PSRR in a 1mm × 1mm Thin (0.4mm ht.) DFN package. Ideal for battery-operated applications, the MIC5524 offers 2% accuracy, extremely low dropout voltage (260mV @ 500mA), and can regulate output voltages down to 1.0V. Equipped with a TTL logic-compatible enable pin, the MIC5524 can be put into a zero-off-mode current state, drawing no current when disabled. The MIC5524 is a µCap design, operating with very small ceramic output capacitors for stability, reducing required board space and component cost for space-critical applications. The MIC5524 has an operating junction temperature range of –40°C to 125°C. Datasheets and support documentation are available on Micrel’s web site at: www.micrel.com.
Features
Input voltage range: 2.5V to 5.5V Fixed output voltages down to 1.0V 500mA gu...