Document
PHOTOCOUPLER
PS9513,PS9513L1,PS9513L2,PS9513L3
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE NEPOC 8 mm CREEPAGE 8-PIN DIP HIGH-SPEED PHOTOCOUPLER
DESCRIPTION
The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9513 is designed specifically for high common mode transient immunity (CMR) and low pulse width distortion with operating temperature. It is suitable for IPM drive. The PS9513L1 is lead bending type for long creepage distance. The PS9513L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. The PS9513L3 is lead bending type (Gull-wing) for surface mounting. Series
FEATURES
• Long creepage distance (8 mm MIN. : PS9513L1, PS9513L2) • High common mode transient immunity (CM H, CML = 15 kV/ s MIN.) • High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.) • Maximum propagation delays (t PLH • Pulse width distortion ( | tPHL • Open collector output • Ordering number of tape product : PS9513L2-E3 : 1 000 pcs/reel : PS9513L3-E3 : 1 000 pcs/reel • Pb-Free product • Safety standards • UL approved: No. E72422 • CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) • BSI approved: No. 8937, 8938 • SEMKO approved: No. 615433 • NEMKO approved: No. P06207243 • DEMKO approved: No. 314091 • FIMKO approved: No. FI 22827 • DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40019182 (Option) tPHL = 270 ns TYP.) tPLH | = 270 ns TYP.)
APPLICATIONS
• IPM Driver • General purpose inverter
Document No. PN10679EJ03V0DS (3rd edition) Date Published September 2009 NS
The mark shows major revised points. The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field.
PS9513,PS9513L1,PS9513L2 PS9513L3
PACKAGE DIMENSIONS (UNIT: mm) DIP Type
Lead Bending Type (Gull-wing) For Surface Mount
2
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
Lead Bending Type For Long Creepage Distance
Lead Bending Type For Long Creepage Distance (Gull-wing) For Surface Mount
Data Sheet PN10679EJ03V0DS
3
PS9513,PS9513L1,PS9513L2 PS9513L3
PHOTOCOUPLER CONSTRUCTION
Parameter Air Distance (MIN.) Outer Creepage Distance (MIN.) Isolation Distance (MIN.) PS9513, PS9513L3 7 mm 7 mm 0.4 mm PS9513L1, PS9513L2 8 mm 8 mm 0.4 mm
FUNCTIONAL DIAGRAM
MARKING EXAMPLE
4
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
ORDERING INFORMATION
Part Number Order Number Solder Plating Specification PS9513 PS9513L1 PS9513L2 PS9513L3 PS9513L2-E3 PS9513L3-E3 PS9513-V PS9513L1-V PS9513L2-V PS9513L3-V PS9513L2-V-E3 PS9513L3-V-E3 PS9513-AX PS9513L1-AX PS9513L2-AX PS9513L3-AX PS9513L2-E3-AX PS9513L3-E3-AX PS9513-V-AX PS9513L1-V-AX PS9513L2-V-AX PS9513L3-V-AX PS9513L2-V-E3-AX PS9513L3-V-E3-AX Embossed Tape 1 000 pcs/reel Magazine case 50 pcs DIN EN60747-5-2 (VDE0884 Part2) Appro.
Similar Datasheet