DatasheetsPDF.com

SWITCH CONTROLLER. RTL8366S Datasheet

DatasheetsPDF.com

SWITCH CONTROLLER. RTL8366S Datasheet
















RTL8366S CONTROLLER. Datasheet pdf. Equivalent













Part

RTL8366S

Description

SINGLE-CHIP 5+1-PORT 10/100/1000 MBPS SWITCH CONTROLLER



Feature


RTL8366S/SR SINGLE-CHIP 5+1-PORT 10/100/ 1000 MBPS SWITCH CONTROLLER WITH DUAL M AC INTERFACES DATASHEET Rev. Pre-1.4 19 Oct. 2007 Track ID: Realtek Semicon ductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Tai wan Tel.: +886-3-578-0211. Fax: +886-3- 577-6047 www.realtek.com.tw RTL8366S/S R DATASHEET COPYRIGHT ©2007 Realtek S emiconductor Corp. .
Manufacture

Realtek

Datasheet
Download RTL8366S Datasheet


Realtek RTL8366S

RTL8366S; All rights reserved. No part of this doc ument may be reproduced, transmitted, t ranscribed, stored in a retrieval syste m, or translated into any language in a ny form or by any means without the wri tten permission of Realtek Semiconducto r Corp. DISCLAIMER Realtek provides thi s document “as is”, without warrant y of any kind, neither expressed nor im plied, including, but .


Realtek RTL8366S

not limited to, the particular purpose. Realtek may make improvements and/or ch anges in this document or in the produc t described in this document at any tim e. This document could include technica l inaccuracies or typographical errors. TRADEMARKS Realtek is a trademark of R ealtek Semiconductor Corporation. Other names mentioned in this document are t rademarks/register.


Realtek RTL8366S

ed trademarks of their respective owners . USING THIS DOCUMENT This document is intended for the hardware and software engineer’s general information on the Realtek RTL8366S/SR chips. Though ever y effort has been made to ensure that t his document is current and accurate, m ore information may have become availab le subsequent to the production of this guide. In that even.





Part

RTL8366S

Description

SINGLE-CHIP 5+1-PORT 10/100/1000 MBPS SWITCH CONTROLLER



Feature


RTL8366S/SR SINGLE-CHIP 5+1-PORT 10/100/ 1000 MBPS SWITCH CONTROLLER WITH DUAL M AC INTERFACES DATASHEET Rev. Pre-1.4 19 Oct. 2007 Track ID: Realtek Semicon ductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Tai wan Tel.: +886-3-578-0211. Fax: +886-3- 577-6047 www.realtek.com.tw RTL8366S/S R DATASHEET COPYRIGHT ©2007 Realtek S emiconductor Corp. .
Manufacture

Realtek

Datasheet
Download RTL8366S Datasheet




 RTL8366S
RTL8366S/SR
SINGLE-CHIP 5+1-PORT 10/100/1000 MBPS SWITCH
CONTROLLER WITH DUAL MAC INTERFACES
DATASHEET
Rev. Pre-1.4
19 Oct. 2007
Track ID:
Realtek Semiconductor Corp.
No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan
Tel.: +886-3-578-0211. Fax: +886-3-577-6047
www.realtek.com.tw




 RTL8366S
RTL8366S/SR DATASHEET
COPYRIGHT
©2007 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by
any means without the written permission of Realtek Semiconductor Corp.
DISCLAIMER
Realtek provides this document “as is”, without warranty of any kind, neither expressed nor implied,
including, but not limited to, the particular purpose. Realtek may make improvements and/or changes in
this document or in the product described in this document at any time. This document could include
technical inaccuracies or typographical errors.
TRADEMARKS
Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document
are trademarks/registered trademarks of their respective owners.
USING THIS DOCUMENT
This document is intended for the hardware and software engineer’s general information on the Realtek
RTL8366S/SR chips.
Though every effort has been made to ensure that this document is current and accurate, more
information may have become available subsequent to the production of this guide. In that event, please
contact your Realtek representative for additional information that may help in the development process.
REVISION HISTORY
Revision
Release Date
Pre-1.0
2007/03/30
Pre-1.1
2007/04/16
Pre-1.2
2007/05/11
Summary
Preliminary release.
Enhance function description and correct some features typo.
Remove pins strapping function in LED_P4_2, LED_P3_2, LED_P3_0,
LED_P2_2, LED_P0_2, LED_P1_0, and LED_P0_0.
Change pins name of STESTG0/1/2, STESTL0/1/2, STESTT, STESTH,
STESTCKP/N, STESTOP/N, and STESTIP/N to SGND, SVDDL, SVDDT,
SVDDH, SDCKP/N, SDTXP/N, and SDRXP/N. Figure 8, Figure 9, Table 2,
Table 3, Table 5, and Table 16.
Add Serdes interface pin description and mode selection in section 6.2 and 9.4.
Add LED_P4_2/RESERVED pin description for normal operation.
Add configuration strapping pins description in section 6.6.
Remove chapter 3 and enhance application example in chapter 4.
Add 1000Base-X application example circuit in Figure 25.
Enhance General Purpose Interface description in section 9.3.
Revise Figure 3, Block Diagram of RTL8366S/SR.
Revise Applications Block Diagram, Figure 4, Figure 5, Figure 6, and Figure
7.
6-port 10/100/1000Mbps Single Chip Switch Controller ii
Track ID: Rev. Pre-1.4




 RTL8366S
RTL8366S/SR DATASHEET
Pre-1.3
Pre-1.4
2007/08/03
2007/10/09
Change the LED_P4_0/DisBlink description in section 8.20. Use pin floating
to disable and pull down to enable power on blinking function.
Remove the original section 8.12.4.
Change the description in section 8.12.4, which only insert PVID for untagged
or change priority tagged packets to be PVID.
Correct the configure description in section 6.3. Change the configuration
name from SEL_P5MODE[2:0] to SEL_P5MODE[1:0]
Add the Thermal Characteristics in section 11.3
Add the RGMII/GMII/MII Timing Characteristics in section 11.5.3 and 11.5.4
Corrected the feature of jumbo frame supporting in section 2
Corrected the SMI signal description of Figure 1. & Figure 2.
Corrected “DisBlink” to “EnBlink” in Figure 8, page 22, Figure 9, page 23,
Table 2, page 25, Table 3, page 27, Table 11, page 40, Table 13, page 41, and
section 8.20, page 61.
Corrected the default values of Register 0,4, 5, 6,7, 9, 15. in section 10.1, 10.5,
10.6, 10.7, 10.8, 10.10, 10.12.
Corrected the GMII Pins ”100Mbps” in section 6.3.1, page 30
to ”100Mbps/10Mbps;
Corrected “DVDDIO1” , “DVDDIO2”to “DVDDIO0”, “DVDDIO1” in
section 11.2, page 79.
Correct the Feature description “One port 1000Base-X Serdes & support
UTP/Fiber” to “Port 4 support 1000Base-X Serdes or UTP”
Combine Table 15 and original Table.12.
Modified the pin name “SWR_FB”, “En_SWR”, ”VSWN”, “VSWP”,
“VPHASE” to “TEST_FB”, “En_TEST”, ”VTESTN”, “VTESTP”,
“VPHTEST” in Table 15.
Appended the Driving Ability to Table 4, page 29,30, Table 5, page 30, Table
6, page 31, 32, Table 7, page 33, Table 8, page 33, 34, Table 9, page 35, 36,
Table 10, page 37,38, 39, Table 11, page 40, 41 Table 12, page 41, 42, Table
13, page 42, 43.
Deleted “SWRVDDH,”, “SWRGND” from Table 41.
Corrected the EEPROM size from 512 bytes to 2048 bytes in section 2, page
15.
Corrected the priority queue from 6 queues to 4 queues in section 1, page 13,
section 2, page 15, section 8.13, page 58, section 8.13.4, page 60.
6-port 10/100/1000Mbps Single Chip Switch Controller iii
Track ID: Rev. Pre-1.4




Recommended third-party RTL8366S Datasheet







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)