OX-080

Low g-Sensitivity Oven Controlled Crystal Oscillator OX-080 OX-080 Features Ultra Low g-Sensitivity Low Phase Noise High Stability Frequency Range: 8 MHZ to 15 MHZ Standard Frequency 10 MHz Vibration Compensation Applications Military Avionics Airborne Radar Test Equipment Frequency Synthesizers Position Location Satellite Communications Performance Specifications Parameter Frequency Range Min 8 Typ Max 15 Units MHz Condition Available Frequencies G-Sensitivity Performance Standard crystal G Sensitivity w\ Low g-Crystal G Sensitivity w\ Low g-Crystal & Vibration compensation (No mechanical resonances out to 2KHz) For oscillators with 0.1 ppb/g out to 2 KHz contact factory. 1 0.2 0.02 ppb/g ppb/g ppb/g Degrades to 0.2 ppb/g above 250 Hz G sensitivity specified per axis Frequency Stabilities1 (Stabilities listed for 10 MHz. For Stabilities above 10 MHz values may degrade. Please contact factory.) vs. Operating Temperature Range (referenced to +25°C) -30 -20 -10 -5 -50 -2.0 -2.0 -0.5 -40 -30 -20 +30 +20 +10 +5 +50 +2.0 +2.0 +0.5 +40 +30 +20 ppb ppb ppb ppb ppb ppb ppb ppb ppb ppb ppb -40… +85°C -40… +70°C -20… +70°C 0… +70°C at time of shipment, nominal EFC Vs ± 5% Load ± 5% after 72 hours of operation after 72 hours of operation Initial Tolerance vs. Supply Voltage Change vs. Load Change vs. Aging / Daily vs. Aging / 1st Year vs. Aging / Year (following years) Retrace2 Vectron International 267 Lowell Road, Hudson, NH 03051 T...