SAW filter
1.SCOPE
HAODA’ s SAW filter series have broad line up products meeting all broadcast standard including NTSC,PAL and SEC...
Description
1.SCOPE
HAODA’ s SAW filter series have broad line up products meeting all broadcast standard including NTSC,PAL and SECAM systems. These filters are composed of two interdigital transducers on a single-crystal. piezoelectrical chip. they are used in electronic equipments such as TV and so on.
2.Construction
2.1 Dimension and materials Manufacturer’ s name : HAODA ELECTRONICS Co. LTD(CHINA) Type : IF389A1D
1 2 3 4 5
1.25 3.8 3.5 5.8
14.5
HD
0.54 2.54
Pin configuration 1 Input 2 Input-ground 3 Chip carrier-ground 4 Output 5 Output
2.2. Circuit construction, measurement circuit
3.Characteristics
Standard atmospheric conditions Unless otherwise specified , the standard rang of atmospheric conditions for making measurements and tests is as follows; Ambient temperature : 15¡æ to 35¡æ Relative humidity : 25% to 85% Air pressure : 86kPa to 106kPa Operating temperature rang Operating temperature rang is the rang of ambient temperatures in which the filter can be operated continuously. -10¡æ ~ +60¡æ Storage temperature rang Storage temperature rang is the rang of ambient temperatures at which the filter can be stored without damage. Conditions are as specified elsewhere in these specifications. -40¡æ ~ +70¡æ Reference temperature +25¡æ
3.1 Maximum Rating
DC voltage VDC AC voltage Vpp 3.2 Electrical Characteristics
Source impedance Load impedance Insertion attenuation Reference level
12 10
V V
Between any terminals Between any terminals
Zs=50¦¸ Z L=2K¦¸//3pF Freq 37.40MHz ...
Similar Datasheet