Dual 1.5A-Peak Low-Side MOSFET Driver
MIC426/427/428
Micrel
MIC426/427/428
Dual 1.5A-Peak Low-Side MOSFET Driver Bipolar/CMOS/DMOS Process
General Descript...
Description
MIC426/427/428
Micrel
MIC426/427/428
Dual 1.5A-Peak Low-Side MOSFET Driver Bipolar/CMOS/DMOS Process
General Description
The MIC426/427/428 are dual high speed drivers. A TTL/ CMOS input voltage level is translated into an output voltage level swing equal to the supply. The DMOS output will be within 25mV of ground or positive supply. Bipolar designs are capable of swinging only within 1 volt of the supply. The low impedance high current driver outputs will swing a 1000pF load 18V in 30ns. The unique current and voltage drive qualities make the MIC426/427/428 ideal power MOSFET drivers, line drivers, and dc-to-dc converter building blocks. Input logic signals may equal the power supply voltage. Input current is a low 1µA making direct interface to CMOS/bipolar switch-mode power supply control integrated circuits possible as well as open-collector analog comparators.
Features
High Speed Switching (CL = 1000pF) .................. 30ns High Peak Output Current ..................................... 1.5A High Output Voltage Swing ........................ VS – 25mV GND + 25mV Low Input Current (Logic “0” or “1”) ........................ 1µA Low Equivalent Input Capacitance (typ) ................. 6pF TTL/CMOS Input Compatible Available in Inverting & Non-lnverting Configurations Wide Operating Supply Voltage ................ 4.5V to 18V Low Power Consumption (Inputs Low) ............................................. 0.4mA (Inputs High) ...........................
Similar Datasheet