VLT130-4100

VLT130 Series Single and Quad Output 130W Universal Input AC/DC Power Supplies Unless stated otherwise, specifications are typical and rated at full load, nominal input voltage, convection cooling and 25oC. INPUT AC Input Efficiency Input Frequency Input Current Inrush Current Auto-ranging 90 to 132V 180 to 264V 82% 47— 63 Hz Full Load at Low Line 3.3Arms, max High Line 40A, max EMC AND SAFETY CE Mark EMC Full compliance with the LVD EN55022-B, CISPR22-B, FCC Part 15 Class B, EN50082-1 EN61000-3-2 Class A and D VDE, UL, c-UL IEC950, EN60950, UL1950 Class 1 SELV VDE: 18934-3336 UL: E150565 OUTPUT Output Power 4,5 DC Output Hold-Up Time Set Point Accuracy Line Regulation Load Regulation 115V/230V V1 and V2 V3 and V4 Min to Full Load V1 and V2 V3 and V4 50% to Full Load Voltage Deviation Recovery Time 3.3V Output 5V Output Primary Limited V1 and V2 V3 and V4 TTL Line Compensation on V1 and V2 Delay after V1 high see page 24 All Outputs No Fan All Outputs With Fan 80W max 130W max See table 15ms +1% +5% Harmonic Correction Agency Approvals Safety Standards Safety File numbers Low Line to High Line 0.3% +1% +5% <7% <1ms 5.1V, +0.4V 6.2V, +0.4V 195W, +35W Short Term 50mV 1% 2ms warning 450mV 10ms <10ms 1+1 No 0 to 50oC — 40 to 85oCto 80W 130W 95%, max >200,000 hrs INPUT CONNECTOR J1 Pin 1 Pin 2 Neutral Line MECHANICAL AC Input Connector J1 Ground Connector Output Connector J2 Output Connector J3 Size Weight Molex 3 position, 0.156 center header 26-60-4030 or equivalent Spade ...