Manual. IC-706MKIIG Datasheet

IC-706MKIIG Datasheet PDF


Part

IC-706MKIIG

Description

HF/VHF/UHF ALL MODE TRANSCEVER Service Manual

Manufacture

Icom

Page 30 Pages
Datasheet
Download IC-706MKIIG Datasheet


IC-706MKIIG Datasheet
HF/VHF/UHF ALL MODE TRANSCEVER
S-14411XZ-C1
June. 2007

IC-706MKIIG Datasheet
INTRODUCTION
This service manual describes the latest service
information for the IC-706MKIIG HF/VHF/UHF ALL MODE
TRANSCEVER at the time of publication.
MODEL
IC-706MKIIG
VERSION
USA
EUR
FRA
ESP
OTH
ITA
ITR
CHN
USA-1
EUR-1
FRA-1
ESP-1
OTH-1
ITA-1
ITR-1
CHN-1
UT-106
Available as an option
Built-in
CAUTION
NEVER connect the transceiver to an AC outlet or to a DC
power supply that uses more than 13.8 V. This will ruin the
transceiver.
DO NOT expose the transceiver to rain, snow or any liquids.
DO NOT reverse the polarities of the power supply when
connecting the transceiver.
DO NOT apply an RF signal of more than 20 dBm (100 mW) to
the antenna connector. This could damage the transceiver’s
front-end.
To upgrade quality, any electrical or mechanical parts and
internal circuits are subject to change without notice or
obligation.
ORDERING PARTS
Be sure to include the following four points when ordering
replacement parts:
1. 10-digit Icom parts numbers
2. Component name
3. Equipment model name and unit name
4. Quantity required
<ORDER EXAMPLE>
1110003491 S.IC TA31136FNG IC-706MKIIG MAIN UNIT 5 pieces
8820001210 Screw 2438 screw IC-706MKIIG Top cover 10 pieces
Addresses are provided on the inside back cover for your
convenience.
REPAIR NOTES
1. Make sure the problem is internal before disassembling
the transceiver.
2. DO NOT open the transceiver until the transceiver is
disconnected from its power source.
3. DO NOT force any of the variable components. Turn
them slowly and smoothly.
4. DO NOT short any circuits or electronic parts. An
insulated tuning tool MUST be used for all adjustments.
5. DO NOT keep power ON for a long time when the
transceiver is defective.
6. DO NOT transmit power into a Standard Signal
Generator or a Sweep Generator.
7. ALWAYS connect a 50 dB to 60 dB attenuator between
the transceiver and a Deviation Meter or Spectrum
Analyzer when using such test equipment.
8. READ the instructions of test equipment throughly
before connecting a test equipment to the transceiver.
Icom, Icom Inc. and
logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United
Kingdom, Germany, France, Spain, Russia and/or other countries.


Features Datasheet pdf HF/VHF/UHF ALL MODE TRANSCEVER S-14411X Z-C1 June. 2007 INTRODUCTION This serv ice manual describes the latest service information for the IC-706MKIIG HF/VHF /UHF ALL MODE TRANSCEVER at the time of publication. MODEL VERSION USA EUR FRA ESP OTH ITA ITR CHN USA-1 EUR-1 FRA-1 ESP-1 OTH-1 ITA-1 ITR-1 CHN-1 UT-106 C AUTION NEVER connect the transceiver to an AC outlet or to a DC power supply t hat uses more than 13.8 V. This will ru in the transceiver. DO NOT expose the t ransceiver to rain, snow or any liquids . DO NOT reverse the polarities of the power supply when connecting the transc eiver. Available as an option DO NOT apply an RF signal of more than 20 dBm (100 mW) to the antenna connector. This could damage the transceiver’s front -end. IC-706MKIIG Built-in To upgrad e quality, any electrical or mechanical parts and internal circuits are subjec t to change without notice or obligatio n. ORDERING PARTS Be sure to include t he following four points when ordering replacement parts: 1. 10-d.
Keywords IC-706MKIIG, datasheet, pdf, Icom, HF/VHF/UHF, ALL, MODE, TRANSCEVER, Service, Manual, C-706MKIIG, -706MKIIG, 706MKIIG, IC-706MKII, IC-706MKI, IC-706MK, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)