TI2204WS-01

TI2204WS-01 INVERTER ELECTRICAL SPECIFICATION 1. APPLICATION This specification is applied to CCFL inverter unit for 22” & 19” 4L color LCD backlight. Panel Type：CMO M220Z1-L06 Rev.C1 & CMO M220Z1-L02 Rev.C1 CMO M190A1-L09 Rev.C1 & AU M220EW01-V0 & AU M220EW01-V2 & AU M190PW01 V0 2. ELECTRICAL CHARACTERISTICS NO. 1 2 3 4 5 6 7 8 Item Input Voltage Input Current Inrush Current Input Power Backlight ON/OFF Control Brightness Adjust (Lamp Current Control) Output Voltage Output Current (Each Connector) Symbol Vin Iin Iin Pin Von Voff Vadj Vout Iout(Min) Vin= Vin= Vin= 12 12 12 V, V, V, Vadj= Vadj= Vadj= 0 0 0 V ( V ( 4 4 Lamp) Lamp) V (Imax) Condition Min. 10.8 ------2.0 0 5 --2.0 6.5 --40 Ta= Vadj = 25 ℃ 0 V NO DAMAGE NO DAMAGE 1400 72 1 Typ. 12 ------------775 3.0 7.5 --50 ------Max. 13.2 2.85 5 37.6 5.0 1.2 0 --4.0 8.5 --60 2200 --2 Unit V A A W V V V Vrms mArms mArms Hz KHz Vrms % Sec Normal Operation Shutdown Normal Operation Vin= Vin= Ta= 12 12 12 V, V, V, Iout= Vadj= Vadj= 7.5 5 0 --- mA ( V ( V ( V 1 1 1 Lamp) Lamp) Lamp) (REF,VALUE) 25 ℃, After running 30min. 25 ℃, After running 30min. --- V , Vadj= 12 V, Iout(Max) Vin= Ta= 9 Burst Frequency Freq Freq Vopen η Tscp Vin= Vin= Vin= Vin= 10 Frequency 11 Lamp Start Voltage 12 Efficiency 13 Striking time Normal Operation 12 V, 12 V, Load= PANEL 14 Open Lamp Protection 15 Short Lamp Protection Note1.：The lamp start voltage is tested under one lamp opened Circuit, with a 10cm Hv-wire connected to Hv Probe to simula...